Another 5.0 build: #projectmerica

[IronFreak]

Ha! yeah now that I look again I do!! That's awesome, mine will be similar.....but not...

[ballski]

i know i know lol

can you see my side exit exhaust too??? lol 2.5" off headers into a 3" Y, then Magnaflow muffler

[IronFreak]

Btw............

Flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares flares !! :hitler:

[IronFreak]

I didn't take pics, but I got a lot done last week.

I ran the water lines and filler, got a new belt on, alternator on, radiator in, some wiring ran, brake lines made and ran, super blue fluid and bled the brakes, Wilwood slave installed, fuel lines ran and holley FPR installed, wheels finished, tires came and installed....

265 on a 10" out back

MMMMMMMM Buddy, that just looks right!! Great job this is coming together nicely!!

True salesman right there!

That's how I roll, This cat ^^^ needs the complete package, don't skimp on the heads, the do the engine good!

[Exodus_2pt0]

I think you need some aluminum heads......I have a GREAT deal on a pair or very newish Edelbrock RPM's

True salesman right there!

[ballski]

I didn't take pics, but I got a lot done last week.

I ran the water lines and filler, got a new belt on, alternator on, radiator in, some wiring ran, brake lines made and ran, super blue fluid and bled the brakes, Wilwood slave installed, fuel lines ran and holley FPR installed, wheels finished, tires came and installed....

265 on a 10" out back

[ballski]

I think you need some aluminum heads......I have a GREAT deal on a pair or very newish Edelbrock RPM's

why are you getting rid of em? What kind of deal? lol

[IronFreak]

I think you need some aluminum heads......I have a GREAT deal on a pair or very newish Edelbrock RPM's

[eurotrash]

You have to weld it back up. Basicly you can fan out the inner fender and weld it to the outer then fill it with expanding foam and weld the slits in the inner fender.

[ballski]

Do you have the jackstands under the subframe? Noticed my ds hit when lifted from the subframe (dif also) but not when on the tires. My bushings are shot though i guess so that could be why but take a look when its on the ground just in case.

Also if you cut the rear flairs out remember its unibody and u'll need to weld ghat juction back up.

I have the jackstands on the pinch rails so hopefully it won't move much once it gets on the ground.

And yes, I noticed that there's a hole now, shit. O well

[eurotrash]

Do you have the jackstands under the subframe? Noticed my ds hit when lifted from the subframe (dif also) but not when on the tires. My bushings are shot though i guess so that could be why but take a look when its on the ground just in case.

Also if you cut the rear flairs out remember its unibody and u'll need to weld ghat juction back up.

[ballski]

cut the stock flares out and that was sad and scary. primed the new flares twice, ready for color and clear.

ordered my tires: 215/40 and 265/40 out back :)

driveshaft is in and fits perfect. I had to use a couple washers on each mounting point of the diff to the subframe since the DS hit at the top a tad

[IronFreak]

No they're fm-10s

I just about lost it when I saw they price tag....NICE WHEELS BUDDY.

I would be to scared to hoon around in them.

[ballski]

They must be an older style? I want to get a good 3-piece wheel for the track, like some RS212 or something. What you have looks really nice too.

No they're fm-10s

[IronFreak]

thank you sir and yes Fikse

They must be an older style? I want to get a good 3-piece wheel for the track, like some RS212 or something. What you have looks really nice too.