Another 5.0 build: #projectmerica

[IronFreak]

Pretty..........:D

[ballski]

traded my holley dp for a Quick Fuel plus cash this week, it's so nice, but haven't ran it yet

[IronFreak]

I'll let you know when I have the tig setup for aluminum, I need to go get some filler rod. You can send it to nebraska if you want!

[ballski]

yes sir

[IronFreak]

Did you test fit that in the car first?.....

[ballski]

Need to find someone to weld this since I'm not setup to weld aluminum:

[eurotrash]

Funfag ive got 2 opels sitting in my barn. 1.9 carbed manta engine swap? Lol 100hp from the factory 40years ago. Lets do it. Ps i had mine driving way before stuart so he cant use that as an excuse

[ballski]

Off the inside diameter center bore of the rotor. Check out the site I posted last page or 2

[IronFreak]

On the surface that mates to the hub or the center bore?

[ballski]

Are these rotors a direct swap from the stock rotors?

No you have to shave off 1mm inside

[IronFreak]

I'm gonna run Corrado g60 rotors and no sorry I don't

Are these rotors a direct swap from the stock rotors?

[ballski]

I need to get one of these ordered. What whas the total cost?
HAHA, I hear ya. It's good motivation. get your 2 step involved and get more videos!!! I'll make it the ringer on my phone haha!

$58

This here seems to come along nicely, would've never had the patience for that bay cleaning ^^

yes it's sooo much more work than I anticipated lol

I think gold with polished lips would be a great color for the Fikse's.

agreed

The stock rotors are approx. 13mm thick while the G60 rotors are approx. 21mm thick. Braking surface on stock is about 35mm while G60 is sitting at about 50mm. Here are some comparison pics, stock vs. G60:

Hope that helps!

Sent from my DROID2 using Tapatalk 2

Thanks man

[IronFreak]

The stock rotors are approx. 13mm thick while the G60 rotors are approx. 21mm thick. Braking surface on stock is about 35mm while G60 is sitting at about 50mm. Here are some comparison pics, stock vs. G60:






Hope that helps!

Sent from my DROID2 using Tapatalk 2

It does!!! Thank you!

[tooslow]

Not sure, those brakes look CLEAN! What kind of rotors and pads are you going to run? Do you know what the width of a stock rotor is? The braking surface? I tossed my old ones.

The stock rotors are approx. 13mm thick while the G60 rotors are approx. 21mm thick. Braking surface on stock is about 35mm while G60 is sitting at about 50mm. Here are some comparison pics, stock vs. G60:






Hope that helps!

Sent from my DROID2 using Tapatalk 2

[325ix]

I think gold with polished lips would be a great color for the Fikse's.