Announcement

Collapse
No announcement yet.

Dmanb2b's Alpine 318is - S52 is ALIVE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Northern
    replied
    205's should be fine on an 8 with final ET3 with maybe a light roll. Might get away with 225's with a good roll even.

    Leave a comment:


  • rjsimeon
    replied
    Wow, you have been doing some work. Lookin awesome! Sent from my iPhone using Tapatalk

    Leave a comment:


  • dmanb2b
    replied
    Originally posted by dadsbmw View Post

    Curious what tire size you ended up going with? Also, are you running adapters, or have you done a 5-lug swap?
    I will probably regret this but trying to squeeze 205/50. I went with 18mm front and 20mm rear 42 draft design adapters. The setup will like require fender rolling and/or pulling. Keep you all posted. Should have new tires next week.

    Leave a comment:


  • dmanb2b
    replied
    Originally posted by eternal24k View Post

    you're probably best off parting it and selling the bits. I am doing the same for the same reason. Those headers look amazing!
    Yeah...that what I'm finding too. I had interest in some parts, but buyer found another source. Thank you on the headers...it's taking a little heat and beating to make them fit, but should work well!

    Leave a comment:


  • dadsbmw
    replied
    Originally posted by dmanb2b View Post
    Time to see how much tire we can slap on e38 weaves
    Curious what tire size you ended up going with? Also, are you running adapters, or have you done a 5-lug swap?

    Leave a comment:


  • eternal24k
    replied
    Originally posted by dmanb2b View Post
    Someone please save this poor m42...no one wants it or the g240
    you're probably best off parting it and selling the bits. I am doing the same for the same reason. Those headers look amazing!

    Leave a comment:


  • dmanb2b
    replied
    Someone please save this poor m42...no one wants it or the g240

    Leave a comment:


  • dmanb2b
    replied
    Another s52 saved from the graveyard...90% rebuild and ready to rip

    Leave a comment:


  • dmanb2b
    replied
    Time to see how much tire we can slap on e38 weaves

    Leave a comment:


  • dmanb2b
    replied
    Axles installed today, Garagistic strut bars arrived after 2 months (ordered on May 24), rear brake lines, front subframe reinforced and painted, raceland headers installed on motor and being prepped to be installed...






    Leave a comment:


  • dmanb2b
    replied
    Steering wheel and headlights arrived. Thank goodness it was packed well because the postal workers obviously don't give a crap. Steering wheel is flawless, but the newly restored Bosch smileys are going to need some grommets replaced. Thankfully lenses and housings were not damaged...ugh





    Leave a comment:


  • dmanb2b
    replied
    New axles are in and the s52 is looking much better now



    Picked up a set of e38 weaves. Unfortunately, the Ronals are now FS

    Leave a comment:


  • dmanb2b
    replied
    well that needs replacing


    Rear subframe coming out. Bushings next


    lil s52 love


    This hasn't been flushed in a while


    old guibo


    not really sure what to say about this

    Leave a comment:


  • dmanb2b
    replied
    944 booster


    Bye bye drivetrain


    New rings


    Engine bay cleaned up a bit

    Leave a comment:


  • dmanb2b
    replied
    ready for some off-roading?


    Engine is out


    z3 Steering Rack swap next

    Leave a comment:

Working...
X