Announcement

Collapse
No announcement yet.

Brianna GPs SpecE30 build for KishG

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BrewCity11
    replied
    Ok, time for everything to come together now. Next two weeks should be eventful.

    POR-15'd the diff, subframe, TA's, etc.



    New Cover installed


    Cleaned and balanced stock injectors came back today


    Trans was dirty, Levent multi-tasked and got her clean.


    Laid out and semi put back together.


    Will be back in a day or two:)

    Leave a comment:


  • kishg
    replied
    Originally posted by rThor432 View Post
    Well, that's a good move. I've got a co-worker that runs Spec-E30 in Southeast and Mid-Atlantic so I'll have to mention that to him.. Looks like an awesome piece. It'd be nice to get rid of the hard cornering oil starvation issues as well.. ha.
    what's your co-worker's name? the pan is a very nice piece. the drivegear guys have data comparing this pan to a crank scraper and this works much better.

    Leave a comment:


  • rThor432
    replied
    Well, that's a good move. I've got a co-worker that runs Spec-E30 in Southeast and Mid-Atlantic so I'll have to mention that to him.. Looks like an awesome piece. It'd be nice to get rid of the hard cornering oil starvation issues as well.. ha.

    Leave a comment:


  • kishg
    replied
    there's a couple guys running that pan or will be this season, some in the SE too.

    Leave a comment:


  • rThor432
    replied
    Wow I think the SE30 guys here in NASA Southeast would freak out if they saw that oil pan or found out about the clutch.. Not saying that they are outside of the rules (I think the clutch is free anyway), but the guys here are really big on OEM components and appearance.

    Excellent car!

    Leave a comment:


  • kishg
    replied
    side view of flywheel/clutch:

    Leave a comment:


  • kishg
    replied
    Paul Poore clutch :

    Leave a comment:


  • kishg
    replied
    and from the other side :

    Leave a comment:


  • kishg
    replied
    that's a paul poore baffled oil pan. here's a closer look:

    Leave a comment:


  • kishg
    replied
    coming down the home stretch.. motor is rebuilt and back at GP for install:

    Leave a comment:


  • psyber_0ptix
    replied
    Looks good! I wish I could keep my 318 and go through it as well as you guys did.

    Leave a comment:


  • kishg
    replied
    Originally posted by ZM Blue Devil View Post
    Not in yet, Paul will install those last after we are done with the car.
    don't worry greg, they are nascar bars :)

    Leave a comment:


  • ZM Blue Devil
    replied
    Originally posted by Moberg12 View Post
    No pics of the drivers side door bars?
    Not in yet, Paul will install those last after we are done with the car.

    Leave a comment:


  • Moberg12
    replied
    No pics of the drivers side door bars?

    Leave a comment:


  • kishg
    replied
    Originally posted by M42Stephen View Post
    I think Spec E30 requires an m20 (in California at least). Correct me if I'm wrong.
    you are correct. m20 engine from my other car is being rebuilt and will go in here.

    Leave a comment:

Working...
X