s50b32 e30 325i tech1 project

[castros]

Car is wicked a whole lot of man hours invested and all worth it mad props you guys did an incredible job nice work, thanx for taking the time and writing this post thumbs up.

[Mr. Horsepower]

Hey mister, what type of mid section silencer is that?

See you almost got the same oil cooler solution as me, but I got nut and cone on the pipes. And Dunlop Hiflex hoses, 275 bar FTW ;)

[HybridNz]

Yet to be mounted, but it will be in the boot or trunk depending on which part of the world youre from :D

[Iain]

How'd you mount the surge tank, mate?

[HybridNz]

Got the car back tonight from the welders tonight.

* Permantly mounted brackets for expansion tank and ODBII
* Flanged removible center muffler with straight pipe insert :D
* Ireland Engineering Front and rear sway bars with adjustible links
* Drive shaft loops
* Custom battery mount for supporting smaller lighter batteries in the boot.


High flow center muffler thats quitened it down a nice amount for the road. But still has its bite, just legal :)





Straight pipe option I can bolt in for track days.





Rear re-inforced swaybar blocks drill through to the boot



Front sway bars connected to the control arms



De-loomed washer tank and sensors, mounted expansion tank and ODBII connector neatly tucked in the corner. I have a replacement clutch reservoir and arm, just need to install it :)




AN Oil lines to cooler.

[Tree18is]

GOOD LORD.. good job!

[HybridNz]

New 2ltr alloy surge tank. Complete with base plate. I looked into getting one with AN fittings however the price of running 4 x fuel lines went up quite a bit. The AN oil line was around $450

[dirtysix]

[increase post count] tits! [/increase post count]

[HybridNz]

Hmmm thread doesnt seem to be updating

edit: now it does :)

dont mind me

[HybridNz]

test

[HybridNz]

HybridNz, I have now updated my project thread with pictures of the oil pan after modification.

Nice work! :)

In other news

Finally got some more update photos.
Ireland Engineering adjustible sway bars are now in and clear the headers ..


Rear sway bar installed -- drilled into body as its a lot more re-inforced than the stock mount points

[Mr. Horsepower]

HybridNz, I have now updated my project thread with pictures of the oil pan after modification.

[HybridNz]

Sounds pretty sweet! I wound expect more wheel spin though.
I will post pictures of the oil pan on my build thread, don't know if you have seen it?

8 month old stale 98 octane isn't helping. Have a listen when I was down the road and you can hear it go for it.

[pogiboy9]

Contractor ? What you said hit home...what type of contracting are you into ?

[Mr. Horsepower]

Sounds pretty sweet! I wound expect more wheel spin though.
I will post pictures of the oil pan on my build thread, don't know if you have seen it?