xAZxE30x's M20 2.8l Turbo Build

[xAZxE30x]

One of these times I'll make it out. I'm going tonight to the 1st Thursday but I've been so busy planning my wedding I haven't done much else with my free time

[Mr. Tasty]

I have been going to pretty much every pav-meet for the past month. I usually don't park with the azbmw guys or w.e, but with some buddies

[xAZxE30x]

Should be in the Happy Valley area.

Ah nice I like it up there. I work kind of near there

Hit me up once you're here and I can introduce you to all the phoenix people. They kind of split off into two different forums so it's a bit of a different crowd depending which meet you're at

Azbmw which you're on as well, does 1st and 3rd Thursday meets one of which is off the 17/101 so close to where you'll be

Then Azbmwcrew which I don't know if you're apart of on Facebook? They meet on Saturdays at the pavilions. They also are into lots of street racing if you're into that.. Me not so much

[Holland]

Nice!!! What part of town you gonna be in? You'll have to come to some meets

Should be in the Happy Valley area.

[xAZxE30x]

Rolled the fronts today, just a little, didn't go crazy on them. Adjusted my shocks and camber and lowered the front and it handles soooo much better. I think I need to trim my bump stops tho. I'm really digging the look :D

[xAZxE30x]

very clean, have you been hitting up pav's?

I haven't been yet since my car has been back together. I plan on going this Saturday tho!

So I'll be moving down the area in a few months. If you see a black E30 with driving lights, that would be me.

Nice!!! What part of town you gonna be in? You'll have to come to some meets

[Holland]

So I'll be moving down the area in a few months. If you see a black E30 with driving lights, that would be me.

[Mr. Tasty]

very clean, have you been hitting up pav's?

[xAZxE30x]

Had a little fender rolling party yesterday with Amr and Rares

Rolled flat and pulled out a decent amount.. Nothing crazy but definately noticeable when comparing to stock





The fronts are still at Max height and the rears are a about 1/4 down. I will play with the heights this week some time. The rear can probably go down 3/4 until it rubs. There's quite a bit of room in there and not sure why people say you have to run a smaller tire with these wheels

Played around a bit with my mtech 2 getting an idea of fitment


Anyone know of a good way to refinish the color on these frenchies?


Rares' new sweet wheels!


Andddddd my boy sitting on Efrens bike having a blast!

[el bimmer]

Wow Very Nice! Keep up the good work!

[xAZxE30x]

No sectioning or cutting. I am running a piece of aluminum in the bottom to fill the gap

No adapters. E30M3 suspension all around

Thanks!! It still needs lots of work before its perfect. Major fender rolling is needed and some camber adjustments

[mbonanni]

Few questions.

How much did you section your housings?
Are you running adapters, and if so what size?

Thanks

Looks great. I love the stance/wheels.

[xAZxE30x]

Looks like my unicorn chains weren't strong enough!




Rear adjusters are at the top, fronts are lowest with no engine weight. Oh my god does it rub in the turns!

It's at my place now where the engine insertion will be done

[xAZxE30x]

Still need to roll all fenders. The rears are all the way up and still touch the fender

[xAZxE30x]

No engine weight.. Subframe is about 1-1.5" off the ground



For those that don't wanna go back to the first page

E30M3 struts
Koni SA inserts
MODE camber plates
GC coilover kit w/ 500/650#

Thanks for looking