I got bored

[whterice]

????

Are you sure you posted the correct car? lol Damn

Trying to post from the mobile phone isn't so easy like from the computer

[ak-]

????

Are you sure you posted the correct car? lol Damn

[whterice]

So a year later and I am happy with how it sits

[hw612]

friend is giving me a killer deal on his crate SR and built tranny so this is my winter project. are these the shit mounts you were talking about?

http://cgi.ebay.com/ws/eBayISAPI.dll...m=271013587529

im trying to get a stock pile of parts so when first snowfall comes we can toss shit together. trying to decide if i should order these or have some made?

[ghalee30]

soo you got bored and decided to drop a sr into a 30?
haha too legit.. verry nice ����

[whterice]

Well summer time has come and I guess its time to start driving this thing as the weather is starting to get great out. Have just been working out all the little bugs with it. Will have a few changes coming pretty soon.

Here it is sitting hoodless for a meet


Heres a new engine pic....


Few of the new things coming are a newly acquired M tech 2 kit and a set of Borbet type C's. Dont worry I still have the Type A's they will make an appearance again soon...

[whterice]

I may do this in the 4 door that I have. So I'll have to pay a local CO to make one up for us. Problem is it's about $400 bucks. SR Motors are getting cheap so it's a ton of fun.

I only have three shops that make and balance driveshafts in my city and all are very closed minded. Nobody wanted to touch the shaft due to the quibo even tho I wasnt using it. Thus why I cut it off myself and took it in and told the shop it was two Nissan shafts. Cost me $420 and one day turn over to get it done.

[catuned]

I may do this in the 4 door that I have. So I'll have to pay a local CO to make one up for us. Problem is it's about $400 bucks. SR Motors are getting cheap so it's a ton of fun.

[whterice]

Sorry to pick your brain: Did you have to make a custom driveline? or is there one that fits? and what rear end you end up using?

-Igor

By all means ask away.

I used the stock shaft with the quibo cut off and the stock yoke from a s14 welded on(s13 is the same yoke different diameter shaft. used s14 due to it came with). Still have the stock center bearing as I only had the front half custom made up for me. I think if memory serves me right the length from center u-joint on yoke to center u-joint before center bearing is 12.25". Currently has a 3.73 lsd but have done some research and will be swapping in some 4.10 gearing to put it closer to stock Nissan gearing.

[catuned]

Sorry to pick your brain: Did you have to make a custom driveline? or is there one that fits? and what rear end you end up using?

-Igor

[whterice]

Yea have taken it for a few rips around town before it snowed has been parked since. I decided to drive my other e30 for the winter just in case I get into an accident it has been apprasied and I will get more for it.

She turned over first try which was very nice and gave me that warm fuzzy feeling

[catuned]

Oh so you have it all running already.. That is sweet. Good going.
It like me going from our E30 M3 turbo car to a stock m20. Or my E36 Vert stroker to a stock M20.. just not the same. You get used to the power after a while and it feels normal but once you jump in to a slower car you get the difference right away..

[whterice]

Hmm what color are they? Ours came powder coated blue

Mine came "powder coated" black but was really spray paint. One of those things where you live and learn. After all the messing around, the cuts, late night work sessions. The car is an absolute blast to drive. Getting back into my other e30 and going for a rip is ummmm slow.

[catuned]

Hmm what color are they? Ours came powder coated blue

[whterice]

We ordered them online.. But not exactly sure what site. I can take a picture of them and post up. Id would be tmrw as I am off from work today.

Am sure they are better quality then what I had. Mine looked like he ran out of gas welding and looked like chickenshit in places. They also angled in like / \ instead of \ /. That was after I had to cut half the mounting plate off so I could actually mount it on the block.