Scum class 318 + Mtech + vortech v2 + unicorns - vortech + Turrrrbo

[BUDNUNTA]

Are those the 330 brakes or just regular e46?

[pandaboo911]

Are those the 330 brakes or just regular e46?

These are the stock e46 brakes. I was told the 330 brakes will bolt up as well but wouldn't fit under 16s, so i opted to use standard e46. e46 are more than enough for an e30

[ngampleh]

how about rear brake setup?
upgrade to e46 or keep stock?

[pandaboo911]

how about rear brake setup?
upgrade to e46 or keep stock?

rear brakes are from an e30 m3

[pandaboo911]

drill bit too big!! solution? grind it.





Chinese cheapo tap held up well, thanks to the good ol' german stuff



said german stuff, cutting and drilling oil



plenty of this stuff


bingo! it's tight like a tiger

[kronus]

nice.

there's no way the cap fits on there, is there?

[pandaboo911]

nice.

there's no way the cap fits on there, is there?

I'm not sure, don't have the dust caps anywhere.

I think with a smaller or thinner washer they would fit.

[mohamed...]

Quick question. For the tears you are using e30 m3 hubs with what caliper and rotor? The regular e46? Also what caliper adapter are you using for that? I bought the same front adapter kit.

[pandaboo911]

Quick question. For the tears you are using e30 m3 hubs with what caliper and rotor? The regular e46? Also what caliper adapter are you using for that? I bought the same front adapter kit.

Rear: e30 m3 hub, e30 m3 rotor, e32 735i rear calipers with e30 m3 caliper carriers. (735i carriers will not work)

Front: e36/e46 NON-M hub, e46 NON-M rotor, e46 NON-M caliper/carrier (328i). Used caliper adapter that's included in the kit

[pandaboo911]

Took it out for a test drive.. first time driving under its own power in almost 3 years!!


PICCCSSSS








Don't worry about the puddle of water.. I was bleeding the coolant :)


I think I may have a faulty fan switch because it doesn't close the circuit even when the coolant is 210 F

[Pantless Spency]

Looking so good. What wheels are those?

[mohamed...]

Rear: e30 m3 hub, e30 m3 rotor, e32 735i rear calipers with e30 m3 caliper carriers. (735i carriers will not work)

Front: e36/e46 NON-M hub, e46 NON-M rotor, e46 NON-M caliper/carrier (328i). Used caliper adapter that's included in the kit

Okay that's what I thought. How hard was it finding the m3 caliper carriers?

[pandaboo911]

Looking so good. What wheels are those?

Wheels/tires covered a few pages back

Okay that's what I thought. How hard was it finding the m3 caliper carriers?

They are available brand new, cost me around $130 each side

[pandaboo911]

I searched forever for some obd2 midpipes locally, but couldn't find any. I opted to do a completely custom exhaust instead

Got all my parts in for the exhaust.. CA legal = $$$$$












I wanted a nice stealthy exhaust that would be quiet while cruising but loud when I get on it.
I hate getting stares from the cops and being pulled over for loud exhaust.
Solution: Dual mufflers, straight through design.

Specs:
Raceland 24v swap headers $140
2" X-Pipe for O2 sensor $30
2x 2" Walker 80801 CARB legal Cats $270
3" Y-Pipe $30
3" Magnaflow Muffler (Straight through) $70
3" Borla Pro XS Muffler $100

[golde30]

Why are you wasting money on CA legal cats when yer running headers? This will never be carb legal anyways rite?