S38 turbo e30 Hartge H35-24 H bomb

[e30m3s54turbo]

I bolted up turbo up with gasket. I didn’t like the gasket. I ordered a stainless steel gasket. I also bought this for my car. I will be adding some euro parts to this project.

[e30m3s54turbo]

I’m having second thoughts on my oil feed from oil housing adapter. I might order a Alpina B10 Biturbo oil filler housing. The Alpina gives me more access to sensors.


I been thinking about buying this cluster with out M tenchnic. I will be having them add Hartge 300klm. I have real Hartge 280 klm.

[e30m3s54turbo]

Was the blue tape supposed to come off?

The blue tape was holding my steel gaskets in place. Some of them were slipping off while I was to aligning turbo manifold. They are off for sure. I don’t want any leaks after 32 bolts to tighten down 😅

[e30m3s54turbo]

progress is good

Yes!
I had to pull the water log off because I couldn’t get two bolts on. The turbo manifold piping was in the way. I was able to get them into log.

[moatilliatta]

Was the blue tape supposed to come off?

[2mAn]

I bolted up turbo manifold and water log. It was a pain in ass to bolt]

progress is good

[e30m3s54turbo]

I bolted up turbo manifold and water log. It was a pain in ass to bolt up.

[e30m3s54turbo]

I been researching on coil packs. I need to buy one that I can test to fit.
I’m need bolt up studs and copper nuts.

[e30m3s54turbo]

Programmable ecu with timing maps, vs the 6al box.

I am researching what oil packs that I can plug in. If you or any one else can give me some leads or links.
Im going to use MSII.

[moatilliatta]

Programmable ecu with timing maps, vs the 6al box.

[e30m3s54turbo]

Why no modern fuel injection system?

Are asking about size injectors?

[moatilliatta]

Why no modern fuel injection system?

[e30m3s54turbo]

I’m done on vacuum lines. Just need vacuum line for MSII, waste gate and blow off.

I been working on extending some wiring to push harness inside glove box.

[e30m3s54turbo]

I’m been reading up on vacuum lines and ordering lines and parts to finish that system.

I want to do wasted spark in the near future. I don’t want to use s38 b38 coil packs on this motor. I will be looking for cleaner coil packs.
For know I’m going to use MSD coil and MSD ignition 6A.

[e30m3s54turbo]

I finished my fuel lines.