New Member - Autox Build

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • kts
    replied
    TRMs from TireRack in 15x8 are light cheap and I think look great. I've read they need a big spacer with upgraded brake kits though. The 15x7 version seems to have better BBK clearance.

    The Team Dynamics are also good looking, cheap, and light. They seen to do better in the BBK clearance area.

    For the wider rubber I'd go with an 8" wheel but that's me.

    Leave a comment:


  • ATone517
    replied
    Very true. My concern was the stock size brakes. Im drooling over a set of Toyo Proxes R888 in 235/50/15 right now. Tire Rack says they have a 9.6 in section width. Those should do quite nicely for a set of autox tires.;D Now I need to find a set of cheap wheels and some nice all seasons for the street.

    Leave a comment:


  • kts
    replied
    Originally posted by F34R
    If you are staying with stock brakes I would stick with a smaller lighter 15". You can get tons of grippy tires in a 225/50/15.
    +1. Lots of good tire choices in 15" and a lot cheaper than 17" tires.

    Leave a comment:


  • WhorifyingHunty
    replied
    When I read through this all I thought was "a VW guy doing it right" Then I teared up a lil.

    In all seriousness great work and I wish that color was oem. It looks so good from a distance.

    Leave a comment:


  • F34R
    replied
    If you are staying with stock brakes I would stick with a smaller lighter 15". You can get tons of grippy tires in a 225/50/15. I am personally tossing up sticking with my UUC BBK just so I can fit a smaller lighter wheel for autox.

    I personally think two sets of wheels are in order for people that autox a bunch. One set for daily use and the other fitted with sticky tires.

    Leave a comment:


  • ATone517
    replied
    Originally posted by F34R
    Did you shorten your housings? From the looks you are running Koni SA inerts, I would take the time to cut 1" out of the housings.
    Yup, the housings were shortened 1 inch.

    For wheels Im thinking either TRMotorsports C1 or C3 or Team Dynamics Pro Race. My problem now is do I go with 15 225s to keep low unsprung weight or 17 245/255 and have a grip advantage. If anyone has experience with these types of setups, I would love to get some feedback.

    Leave a comment:


  • matthugie
    replied
    Nice work! Glad to see this being done properly. For SCCA you'll be in Street Mod (SM) because of the engine swap.

    Leave a comment:


  • F34R
    replied
    Did you shorten your housings? From the looks you are running Koni SA inerts, I would take the time to cut 1" out of the housings.

    Leave a comment:


  • ATone517
    replied
    Originally posted by deutschman
    Cool beans. To bad it had all that rust. What a cool color!
    It is but the car recently had a cheap macco paint job and considering all the rust removal I had to do, it will be repainted eventually, most likely a different color.

    Originally posted by Ocell
    Are you planning to put in a 5-speed with the engine swap? (Was that a stupid question?)
    Yup, of course. :D

    Originally posted by Eric
    Great start, love the fab work.

    What class are you planning on running in with those planned mods?
    Off the top of my head for SCCA I think Prepared Class. Im going to start running with BMWCA too. For that they just keep tacking on points for every mod you have. If I remember correctly ill be in the modded e46 m3 or stock e92 range. Hopefully its competitive in at least one of those clubs.

    Originally posted by E30 Wagen
    Great job. I love seeing rust fixed properly.
    I couldn't sleep at night if it wasn't.

    Leave a comment:


  • deutschman
    replied
    Cool beans. To bad it had all that rust. What a cool color!

    Leave a comment:


  • Ocell
    replied
    Are you planning to put in a 5-speed with the engine swap? (Was that a stupid question?)

    Leave a comment:


  • Eric
    replied
    Great start, love the fab work.

    What class are you planning on running in with those planned mods?

    Leave a comment:


  • E30 Wagen
    replied
    Great job. I love seeing rust fixed properly.

    Leave a comment:


  • ATone517
    replied
    New updates from this weekend. I removed the suspension and brakes from the car, cleaned and painted everything. I modified the strut housings and assembled the coilovers.





    Next calipers need to be rebuilt, new bushings and bearings need to be installed, then everything goes back on the car.

    Now I need to find a motor and make a decision on wheels and tires. Its such a PITA to find what Im looking for in a 4x100 bolt pattern.

    Leave a comment:


  • ATone517
    replied
    Originally posted by F34R
    I was freaking out about that damage to the rockers...then saw you did it right! Hope you did not pay a ton for that with the work you had to do. And nice cage! I need to get started on mine.
    I freaked out too when I realized it was made of 90% bondo. Who ever fixed it before me did a terrible job. As far as costs a new rocker only cost me 45 bucks then some sheet metal to patch up the inside.

    Originally posted by JCarp90
    I like where this is going.
    Thanks, me too!! Cant wait to get it done.

    Leave a comment:

Working...