SI Shift Lights - by E30 Innovative Goods

[E30 Innovative Goods]

Sorry for the delay.
We received the new boards two days ago, but we wanted to test them and make sure they are good to go.



They are!

All that is needed now is a few days to finish the soldering for the first batch. It should be done by the end of the week. When you receive the boards and see the size of them you will see this is not an easy job.

In a day or two we will send you via PM the details on how to pay to each of you that are on the first batch.

[TehRaydarlover]

Any updates? New boards?

[Mesarina]

whatever it takes to get a good working 1st batch

[E30 Innovative Goods]

We're sorry to bring you little bad news.

Our ordered PCB's for the r3v calibration board came in faulty. We're really pis.. off :curse::curse::curse:

If you know anything about PCB-s you will be able to spot the fault in no time.



We filed a complaint and were prommised to receive new PCB in 10 days.
Please be patient. We are doing all we can so that you receive your boards as soon as possible.

[E30 Innovative Goods]

Do you have any idea when the second batch will be in? Are these light now "plug and play" like install bored to the main board make holes for lights and the Watch the awesomeness? Also how do you tell if you have the 7 or 9 led cluster

Not yet, we are still working on the first batch. We have the main LED boards ready. We need to finish the adapter boards and R3V calibration boards to make the adjustment possible.

Shiftlights are almost "plug and play", there will be some calibration to do on your side to adjust he thresholds to your liking.

Early cluster with 9 SI LEDs, note 3 red LEDs.



Late cluster with 7 SI LEDs, note 1 red LED.

[ThatOneEuroE30]

E30 Innovative Goods projects - SI shiftlights, hazard switch multi gauge...

Do you have any idea when the second batch will be in? Are these light now "plug and play" like install bored to the main board make holes for lights and the Watch the awesomeness? Also how do you tell if you have the 7 or 9 led cluster

[JamesE30]

:up: :up:

Cant wait for the second batch!

[E30 Innovative Goods]

any news yet?

Yes, these are main boards ;D

[Mesarina]

any news yet?

[TehRaydarlover]

List for the second batch:
1.) Harrisfb - qty 1
2.) Jamese30 - qty 1
3.) Kid325e - qty 1
4.) ThatOneEuroE30 - qty 1
5.) nomansland92 - qty 1
6.) SixerFixer - qty 1
7.) eur04lif3 -qty 1
8.) dude8383- qty
9.) Aitch - qty 1
10.)TehRaydarlover -qty 1

[E30 Innovative Goods]

Eeek. ok. Paypal ready I think - but before I do? But...Where are these shipping from? What country?

We are proud to ship from Slovenia.

[Mikhail Bakunin]

Eeek. ok. 18 posts. Paypal ready I think - but before I do? But...Where are these shipping from? What country?

[E30 Innovative Goods]

Paypal ready! But you only have 17 posts. Where are these shipping from?

Yes, this post makes it 18 ;)

We have to start somewhere, just like everybody else did. We already stated that the second batch will not be sent out untill we get some feedback from the first batch. You are welcome to wait for that before you decide anything.

We ship from Europe.

[dude8383]

I'll kick myself if I don't. Great sleeper solution for a track day car.

List for the second batch:
1.) Harrisfb - qty 1
2.) Jamese30 - qty 1
3.) Kid325e - qty 1
4.) ThatOneEuroE30 - qty 1
5.) nomansland92 - qty 1
6.) SixerFixer - qty 1
7.) eur04lif3 -qty 1
8.) dude8383- qty 1
9.) Aitch - qty 1
10.)

Hehe my thoughts exactly.

[aitch]

I'll kick myself if I don't. Great sleeper solution for a track day car.

List for the second batch:
1.) Harrisfb - qty 1
2.) Jamese30 - qty 1
3.) Kid325e - qty 1
4.) ThatOneEuroE30 - qty 1
5.) nomansland92 - qty 1
6.) SixerFixer - qty 1
7.) eur04lif3 -qty 1
8.) dude8383- qty 1
9.) Aitch - qty 1
10.)