86' Widebody Eta Track Car Build

[Spiff325iS]

Oh lovin' this thread. Keep going.

[thestein1016]

Not much work done on Audrie... namely because I just got Katherine back and have been tidying up some things here and there. Should have time this weekend to start up on the cage again.

12009623_10100998769010842_8906804998994616809_n by Chris Mui, on Flickr

[thestein1016]

A few people have asked how much track width I've gained so I figured easier to just post a pic

[TroyShark]

Awesome work. I cannot wait to finish school to be able to do something similar.

[thestein1016]

Things go by so much faster after you've already designed the first set and wrote down the measurements, ha-ha
55 minutes later

[ThatOneEuroE30]

sweet so your the guy with the pesch kit. keep it up man good work

[george graves]

sub'ed

[ncrmtrsprtsE30]

judging by the work ive seen so far, this is going to be one clean e30.

[m3mods]

Damn lookin' good!

[thestein1016]

Rear bumper mounted. Based on the shape of the rear bumper Im expecting just shy of 2 inches wider than stock not including the additional width of the flares. Overall, maybe 3.5-4in wider each side.
IMG_20150907_092751 by Chris Mui, on Flickr

[thestein1016]

Bumper brackets
IMG_20150724_171905 by Chris Mui, on Flickr

IMG_20150724_173725 by Chris Mui, on Flickr

IMG_20150725_093238 by Chris Mui, on Flickr

IMG_20150725_093527 by Chris Mui, on Flickr

IMG_20150725_102306 by Chris Mui, on Flickr

[sayed ali]

Nice build

[ak-]

This is great. Hope to see it at an In N Out near you!

[thestein1016]

I just wish the arches rolled closer to the hood line. We'll see how things go. I'm far from doing anything with the body to this extent anyways.

O, now I get what youre saying and I totally agree

Got some things done last night. Finished up the diagonal bracing on the rear down tubes as well as re-notched the main hoop diagonal.

IMG_20150907_092636 by Chris Mui, on Flickr

Im a big fan of nodes
IMG_20150907_092711 by Chris Mui, on Flickr

Also gutted both doors and was able to get the driver side door bars done. It doesnt look like much but for some reason this took FOREVER to get the right angles and the right notches.
IMG_20150907_092619 by Chris Mui, on Flickr
If you are wondering, yes the top bar is slightly in more torwards the driver as it follow the contour of the driver door really tight.

[Jony]

woooow really nice widebody:coolphoto:;) of course e30 too