FreedomM3's RestoMod Diary - 89 325i

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • FreedomM3
    replied
    PM's replied. Shoot me a text for faster response! 404-556-2022


    I was working on the timing belt/waterpump/thermostat/seals today.. I was hoping to have her somewhat road worthy by this weekend but I need to order some needed parts for the car to run.

    While trying to remove the rotor, all 3 allens stripped and would not come off. I managed to break two loose with a wrench but the third didnt have enough room. While attempting to remove it, I destroyed the actual rotor. I was planning on replacing soon, just not today. Along with the cap, that was well in need of replacement I think i found the source of the slight misfire. all the leads where gross and fell apart when i touched them.. Upon inspection the water pump and timing belt seemed to actually be in great shape. Everything in this car has been brittle and I was afraid the timing belt would be the same. I replaced everything anyways so I KNOW what is under the covers! I was taught to always make things nicer and cleaner when I work on cars so I always try to clean it up some while being mindful I dont have the budget to a complete rebuild of everything.

    before:




    degreased and cleaned the entire area I could!

    I left it like so waiting for certain parts that I cleaned up and painted to dry. The car will be done tomorow waiting for new rotor, cap, and wires to come in. Hopefully by Monday they will be here. ugh.





    So in all, only OEM parts replaced today:

    -Timing Belt, Tensioner & Spring
    -Water Pump / gasket
    -Thermostat / Seal
    -Camshaft Seal

    On the way:

    -Bremi Cap
    -Bremi Rotor
    -Bilstein B8 Rears
    -A/C Drive Belt
    -PS Drive Belt
    -ALT Drive Belt

    I feel like I forgot to order something :/ Someone buy the 2.93 from me!

    Hope you guys enjoy the progress! I cant wait to drive the car and feels all the new parts :)
    Last edited by FreedomM3; 09-24-2015, 02:19 PM.

    Leave a comment:


  • phenryiv1
    replied
    I shot you a PM regarding the parts car.

    Leave a comment:


  • rcsoundn1
    replied
    Nice project! I too need white vert parts. PM incoming

    Leave a comment:


  • FreedomM3
    replied
    Hoping to have the belt done and suspension done this weekend and take a small drive up to the ga mountains. It will be a nice cruise

    Leave a comment:


  • FreedomM3
    replied




    Don't mind the hub and top hats, I'll be ordering drop hats..

    The set screw, screwed me on this side. Leaving me to have to buy a die and tap set. The set screw won't go back into the hub because of some small rust :(

    These hubs are good but will be replaced in a few months when I can afford new arms and the bushing.



    So my setup is:

    Bilstein B8 Sport
    IE Stage III

    Unfortunately I could set the other side down to see the new ride height. It would be short lived anyways. I still gotta do the timing belt and pump. I've been dressing this. Ugh
    Last edited by FreedomM3; 09-21-2015, 04:43 PM.

    Leave a comment:


  • FreedomM3
    replied
    This was a manual 325i. That's interesting. Apperantly the kid planned on doing a v8 swap at some point. Maybe he swapped it
    Thanks for reading and posting!

    Leave a comment:


  • Teaguer
    replied
    Originally posted by FreedomM3
    Thanks! You know.. I've been thinking about the LSD.

    What did the vert come stock with? I was under the impression its OE. I've been considering selling it, not sure..

    Well all verts are "i" cars so like all other US m20b25 cars the manuals came with a 3.73 while the automatics came with the same or the 4.10 depending on the production date.

    Leave a comment:


  • FreedomM3
    replied
    Thanks! You know.. I've been thinking about the LSD.

    What did the vert come stock with? I was under the impression its OE. I've been considering selling it, not sure..

    Leave a comment:


  • Teaguer
    replied
    Nice. Decent score on the car and good score on the parts car!
    Not that it matter but that vert never came with 2.93 as stock.
    You may also reconsider installing it along with your m20. May be better trading for a 3.73 or at least waiting till you have a bit more power.
    It will take more torque to pull a 2.93 decently.

    Leave a comment:


  • FreedomM3
    replied
    Originally posted by CRBR30
    Looks like a fun project!
    Certainly has been, although everytime I take something apart my ever growing need to buy list grows with it! Time for a brand new e30. Glad lots of parts are available.

    Leave a comment:


  • FreedomM3
    replied
    Fun photo from today..



    I ended spraying some clear on the valve cover too



    Then this happened.. You know for a ga car, this thing has se wierd rust in places.




    The collar to remove the strut inset will be fun. It's completely rusted... Ugh I'm going to need to take all 4 suspension components to the shop and do everything there because of the rust.

    On a positive note, I was able to get rid of the top, passenger door and passenger fender! One step closer to getting rid of the parts car

    I also got some tools.. Professional Series Floor Jack, It's a special edition in FDE and they donate a small portion to wounded veterans. Couldn't beat a sweet looking, long lasting service jack for my shenanigans.





    Last edited by FreedomM3; 09-20-2015, 04:05 AM.

    Leave a comment:


  • CRBR30
    replied
    Looks like a fun project!

    Leave a comment:


  • FreedomM3
    replied
    Small update: Nothing important got done. It was way to hot outside today. I picked up my parts! I love having a good friend with access to worldpac. All OEM supplier parts at cost..��

    I got the following items:



    Cam caps x4
    Timing belt
    Timing tensioner & spring
    Thermostat
    Water pump
    Spark plugs (Bosch)
    Valve cover gasket
    Upper and lower hoses

    Hopefully I'll get it done on Monday. I'm afraid to turn the car on since its been sitting a while and I have no evidence on when it was done last. Anyways I did the new plugs after I did a compression test. Degreased the inside and out of the valve cover gasket, installed the gasket and threw some paint on it. Woot




    Made my own parts wash. Home Depot had the right idea!



    Hi temp primer and paint. It's no powder coating but it will do :)





    Once I have the rear subframe ready, maybe I'll take it with me to the powdercoaters



    How I left her. I'll be installing the springs so we can take it for a sping after the maintenance and interior is done. After that she'll go back on 4 jack stands for complete suspension swap and possibly paint by then!






    Left all the wheels I now own degreasing. You know, the wheels the car has are horrible but the yokohamas that are on them are brand new and they are 16s! I'll trash of sell the wheels and swap the tires over to the TRM C1s I plan on getting!

    Funny pic of the day



    My mothers neighbors hate me lol
    Last edited by FreedomM3; 09-18-2015, 02:32 PM.

    Leave a comment:


  • FreedomM3
    replied
    Shoot me a PM, I have no use for convertible parts.

    I may go with Poly purely because this is a weekend car and it will be driven, occasionally taken to the mountains, small meets, trips etc but it will be DRIVEN. I love the OEM price point though. Sub $1,000 I can have the Bilsteins and entirely refreshed suspension.

    I also need to order the timing belt kit and get that done.

    It seems you have to snag them, which is what I certainly did with the coupe. I will keep the M20 until she kroaks then I will go Toyota. Though I have though of a simple M50 swap..

    So in all I got a 2.93 LSD, IE STG3 Springs, Hub / Wheel, New tires and spare wheels for $285. Works for me!!!

    Leave a comment:


  • fight4life28
    replied
    Very nice progress and you got them both for great deals, there still out there you just have fast eye and pickup them up quick. Go with OEM if you want DD ride and poly if your plan is drive it hard and possibility do a swap later down the road.

    I went with poly just because I could easily install new ones, without paying a shop to press new ones in.

    I am looking for few things that are convertible only parts if you still have the vert laying around, There small things besides.

    Leave a comment:

Working...