I replaced my idler and tensioner pulleys, radiator hoses, bled the coolant system, flushed my power steering system, replaced my crush washers, and bled power steering system. After I finished went to take the car for a test drive and the power steering pump is groaning. And I also broke my radiator drain plug.
-
How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse. -
getting s52 ready for install...;-)Comment
-
Installed some used tires from work. Got in a car with some 195/60/14 tires with almost like new tread. Glad to get rid of the tall ass 205/70/14 tires that was on it.Comment
-
Installed S3.46 medium case. It is exactly what I have been needing.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.Comment
-
Starting to plan new intake plenum...88 325is. S54, CSL airbox, Motec M800, Motec C127, Motec PDM15, Stoptech STR, MCS 2 way coilovers, Forgeline wheels, Recaro SPA, Eisenmann, Personal, lots of custom.
90 318is. As new OEM+, BBS LM, AST 4210 2 way coilovers, Wilwood SL6R/SL4R, Dynaudio, Recaro ExpertsComment
-
Installed p/s brake ducting
Installed oil pan ground cable
Completed valve adjustment
Installed temporary PCV breather hose replacement until the new hose arrives.
Comment
-
-
Recovered my stock shift knob. This is my first try at, think it came out pretty good. I got some glue on it, but I got it off after pics.
Comment
-
Not a bad job at all. Good job.Originally posted by borgey View PostRecovered my stock shift knob. This is my first try at, think it came out pretty good. I got some glue on it, but I got it off after pics.
Comment
-
I think next time I will use a smaller leather punch and larger thread. The stock knob comes without exposed stitches but I like the way it felt with a the raised stitches. Offered up a healthy dose of instant gratification! Definitely grabbing another one to practice on. Now, I'm addicted!Originally posted by Dakotademon7 View PostComment
-
Scratched it :(Attached FilesComment
-
-
Made a throttle body gasket, made a gasket got the throttle body heater housing and reconnected it, simple greened the engine bay, pulled my driver side smiley, painted the reflector with chrome paint, re routed a few wires,
Comment
-
Slathered my seats in leatherique while its sitting on the top deck of the parking garage in the sun.-Christian
'02 ///M3 CarbonSchwartz 6MT daily beast
08/91 Mtechnic II 325IC alpine/lotus
318iS, slow build/garage queen...
'37 Chevy pickup, the über project
Originally posted by roguetoasterComment
-
See if you can mount the wing on the DB.Originally posted by Dakotademon7 View Post
I Timothy 2:1-2Comment
-
Installed a go really fast button. Race cars have them and they go fast. Makes sense.
Last edited by Madhatter; 06-10-2014, 06:30 PM.Just a little project im working on
- http://www.lse30.com -Comment
Comment