I haven't posted anything big in ages...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • FredK
    replied
    At my local machine shop, it's $60 to get a block hot tanked, $20 per cylinder to hone.

    Leave a comment:


  • dude8383
    replied
    Short update dudes:

    Took apart the block completely...didn't bother with the plastigage just yet because I'm getting some M52 bits instead :D

    M52 crank, M52 rods, M52 pistons!! MOO POWA!!! Well torque...

    Anyways, on to the pics:











    I was thinking about getting the block hot tanked...What is the approx cost for this?

    Leave a comment:


  • dude8383
    replied
    Originally posted by FredK
    Well, cover up the top of the engine so crap doesn't get in. :D

    I've painted a couple of engines so far and I've just used a scraper to dislodge the heaviest buildup of crud, then a steel brush and engine degreaser to remove the remaining oils. Finally a washdown with some brake parts cleaner, and then you're ready for paint.
    How do I protect the piston's and the cylinder walls from any over spray?

    I was thinking some saran wrap and painters tape.

    Originally posted by 318isbmw
    haha, its funny how many of us m42 guys are going w/ m50's...
    Yes indeed! I've been thinking about it for the longest time. Finally I'm there but I've got a long road ahead of me!

    I just found out that the build up of crud around the cylinders is due to the motor burning oil! Now I have to pretty much do a full rebuild - not something I had planned on doing!!!!

    I'm pretty pissed, but also happy that the motor is still on an engine stand....BUT I'm still pissed that I have drop a shit load more money into this :(

    Originally posted by MIKe30
    that car in the pic doesnt look diamondschwarz to me - am i missing something?
    Yes you are =) That is Sam's 318i sedan. No work has begun on the dschwarz car because he still drives it!

    Leave a comment:


  • MIKe30
    replied
    that car in the pic doesnt look diamondschwarz to me - am i missing something?

    Leave a comment:


  • 318isbmw
    replied
    haha, its funny how many of us m42 guys are going w/ m50's...

    Leave a comment:


  • FredK
    replied
    Well, cover up the top of the engine so crap doesn't get in. :D

    I've painted a couple of engines so far and I've just used a scraper to dislodge the heaviest buildup of crud, then a steel brush and engine degreaser to remove the remaining oils. Finally a washdown with some brake parts cleaner, and then you're ready for paint.

    Leave a comment:


  • dude8383
    replied
    Thanks man!

    Anyone care to chime in about the cleaning bit?

    Leave a comment:


  • iwantspeed
    replied
    looks great

    Leave a comment:


  • dude8383
    replied
    Short update!

    Spent all weekend taking the motor apart...I need to order more gaskets, I thought I had everything :(

    Onto the pics!

    Where it happens baby!!



    Tranny (guess which is one is which)



    On the stand:



    Valve Cover off:



    Block:



    Head off:



    Block:



    So I have a 3.25 LSD that I'm picking up this weekend and I will hopefully put the motor back together over the weekend as well.

    I have almost everything I need to get the swap going :)

    So I've been slowing degreasing the accessories, nuts and bolts.

    I've been using the Simple Green car wash green gooey stuff and it works better than the degreaser!

    I threw all of small shit in a bucket full of mineral spirits, I hope the stuff will clean up well..

    Any recommendations on how to clean the block and prep it for high temp paint, what about the accessories?
    Last edited by dude8383; 09-17-2010, 07:15 AM.

    Leave a comment:


  • dude8383
    replied
    Originally posted by MR 325
    Nice. An M50 is a 318iS' best friend.
    WERD.

    Leave a comment:


  • dude8383
    replied
    Originally posted by M42Technik
    Rusted out, enormous moneypit 1602 that needs full restoration < Built M42 in Diamantschwarz with a new paintjob, Ronal LS wheels, iS sideskirts, MHW tails, near perfect everything that is less of a moneypit and complete already.

    Thats just my opinon though, I was looking at a 2002 myself...
    Oh dude, he wants a project.

    He knows what he got him self into haha.

    Both of us are happy with the decision so thats all that counts.

    M50 here I come :)

    Leave a comment:


  • MR 325
    replied
    Nice. An M50 is a 318iS' best friend.

    Leave a comment:


  • M42Technik
    replied
    Originally posted by dude8383
    Yeh dude, he will have a kick ass 2002!!!!
    Rusted out, enormous moneypit 1602 that needs full restoration < Built M42 in Diamantschwarz with a new paintjob, Ronal LS wheels, iS sideskirts, MHW tails, near perfect everything that is less of a moneypit and complete already.

    Thats just my opinon though, I was looking at a 2002 myself...

    Leave a comment:


  • dude8383
    replied
    Originally posted by M42Technik
    Wait wait wait...you're getting Sam's Diamantschwarz?! I can't believe it. That was the best M42 car out there. So subtle, so fast.
    Yeh dude, he will have a kick ass 2002!!!!

    Leave a comment:


  • M42Technik
    replied
    Originally posted by dude8383
    Yeh, the M50/dshwarz will be my car.

    The MM motor is going in the 1602 because it will keep him motivated!
    Wait wait wait...you're getting Sam's Diamantschwarz?! I can't believe it. That was the best M42 car out there. So subtle, so fast.

    Leave a comment:

Working...