Badass biimer street setup - Test 1

[turbo325i]

There is something in the air over there...

[karel]

OMG - no magic at all huh. Just make the bottom end bulletproof.

hehe well :) maybee some magic.. but not much :)

[graphikg]

OMG - no magic at all huh. Just make the bottom end bulletproof.

[karel]

what is zf gear box? good luck! i hate the safety bullshit that comes with making a car certified to run 8.9 and faster...

in sweden we call it zf.. the same gearbox as m3 e36, the 6 speed (and same as 525tds e34, a bit diffrent ration on first gear)

I should send my m10 block to you, and see what kinda power you can make out of it.

and now:

e30 is the new supra

haha.. its no magic what we do to the engines, fully forged bottom end and a lots of boost :D

I'm very interested in what you're running from the flywheel back... what flywheel/clutch/gearbox/drive-shaft/rear-end is in it?

in this white one we are running, zf gearbox (m3 e36 5 speed) witch saschs preassure plate, and 4p sinter clutch, custom made driveshaft with ford 9" rear end

on my green one its the same, with custom made e36 328 main driveshaft, b7 turbo alpine diff, and custom made driveshafts with m535 hubs

except we can crack single-digit 1/4's with under 1000hp :)

hehe true.. i ran 9,62 with "standard" (the Green Bmw) rear end this weekend,, my friend with his 1174whp supra ran 9,65 :D

[ScHpAnKy]

I should send my m10 block to you, and see what kinda power you can make out of it.

and now:

e30 is the new supra

except we can crack single-digit 1/4's with under 1000hp :)

[ScHpAnKy]

I'm very interested in what you're running from the flywheel back... what flywheel/clutch/gearbox/drive-shaft/rear-end is in it?

[fiftytakedowns]

I should send my m10 block to you, and see what kinda power you can make out of it.

and now:

e30 is the new supra

[jeffw]

jesus fuck

[dkbmxer002]

track goals with this one is 8sek with zf gearbox.. :)

what is zf gear box? good luck! i hate the safety bullshit that comes with making a car certified to run 8.9 and faster...

[karel]

fucking pimp, what are your track goals?

track goals with this one is 8sek with zf gearbox.. :)

[cbouchez]

Wow~!~

[karel]

I think it is almost the same except for stronger springs, lifters and valves. Thats if I remember correctly. Plus the vanos is upgraded.

ah okay.. doesent sound impossible :)

[dkbmxer002]

fucking pimp, what are your track goals?

[graphikg]

I think it is almost the same except for stronger springs, lifters and valves. Thats if I remember correctly. Plus the vanos is upgraded.

[karel]

whats the difference between us spec and euro spec? should be the same or ?

a lots of people have dynoed over 500whp with stock bottom end.. but if you are planning to go higher i would put some forged stuff in it.

lowering the compression and putting some nice head gasket is always a way to go