Group Buy Pre-Order Thread: e30 fitment 15x10 track wheels

[klodkrawler05]

you'll be needing 15mm spacers rear and 20mm spacers in the front. fender rolling and extremely stiff springs may be enough however its a safe assumption that fender cutting and flares will allow for a better fit.

[brian52555]

What kind of spacers would be needed to run the 15x10 wheels? I'm assuming fenders will need to be cut, ie fender roll won't be sufficient.

[Wh33lhop]

Cool to get an idea what the 4-lug version looks like. Good to see they're being made! Sucks about the offset though, heh.

[JRKOUPE]

nice work......kudos

[klodkrawler05]

Phil's tire service is now taking orders for the 15x10 jongbloed wheel in et5 its not quite the et0 we were hoping for but hey it's going to require 20mm less spacer than the 6ul!

You can see the official release on their website weight is expected to be 14.5lbs and they'll be here shipping in April:

http://www.philstireservice.com/

[z31maniac]

Interestingly Ryan contacted me out of the blue today and it sounds like these might be getting ordered!!!

The low offset?

I know I got Bill at Flyin' Miata to take over the GB for the Miata offsets.

[Wh33lhop]

That's good news! Or rather, better than nothing, lol.

[klodkrawler05]

The 15x10 that is correct.

[bmnut2002]

Interestingly Ryan contacted me out of the blue today and it sounds like these might be getting ordered!!!

The 15x10s?

[klodkrawler05]

Interestingly Ryan contacted me out of the blue today and it sounds like these might be getting ordered!!!

[Wh33lhop]

personally I think that wheels sux.......

Im so bummed no one stepped up to get a 15 x 8 wheel just like the wheel being offered in this thread. Its a beautiful period correct wheel.... I wanted to handle the GB...15 x 8...e 30 specific...........really bummed.

15x9 is where it's at.

[JRKOUPE]

Another wheel option in 15x8 +25 that looks like it will clear a BBK.

the wheel is also being made in 15x7 and 15x9, but not in E30 friendly offsets.


http://www.good-win-racing.com/Mazda-Performance-Part/61-1386.html?mv_source=News1

I know the picture is for a 5 bolt/lug pattern, but the wheel will be 4x100. it looks like a good track alternative to TRM C1 wheels. No guarantees on BBK clearance, but they claim BBK clearance for a miata.

personally I think that wheels sux.......

Im so bummed no one stepped up to get a 15 x 8 wheel just like the wheel being offered in this thread. Its a beautiful period correct wheel.... I wanted to handle the GB...15 x 8...e 30 specific...........really bummed.

[Bullwings]

Another wheel option in 15x8 +25 that looks like it will clear a BBK.

the wheel is also being made in 15x7 and 15x9, but not in E30 friendly offsets.


http://www.good-win-racing.com/Mazda-Performance-Part/61-1386.html?mv_source=News1

I know the picture is for a 5 bolt/lug pattern, but the wheel will be 4x100. it looks like a good track alternative to TRM C1 wheels. No guarantees on BBK clearance, but they claim BBK clearance for a miata.

[z31maniac]

Tires are free, the car is classed in DSP. Cut the fenders, stuff the tires under. 15x10.5, 275s is easy.



The E30 is definitely competitive. Trophies to E30s the past 2 years at nationals. Right, a jacket isn't likely any more, but being in the thick of things is.

Yeah, but in reality (if someone was really thinking of Nationals vs just having fun in the car they like) , who wants to spend thousands of dollars building the car, thousands more in tires/test-n-tune, to build a car that doesn't have a realistic shot at Nationals in the class.

[Bullwings]

^That's actually really nice to know.

Thanks for that info.