Official SoCal PARTS For Sale Thread

[2mAn]

Edit: Sold

[bmwfan52]

Anyone with a 84-86 318i manual trans and/or driveshaft?

Also looking for a manual pedal box from any E30.

I have a few sets of pedal boxes I’ll shoot the for 240 pick up from LA 270 free shipping in USA . Pm me

[bmwfan52]

Anyone with a 84-86 318i manual trans and/or driveshaft?

Also looking for a manual pedal box from any E30.

I have a few sets of pedal boxes. Pm me

[88 ragtop]

Hello All
I have a very nice set of RARE old school 4 x 100 15 x 7 ET25 MOMO Penta star wheels. None of the wheels have any curb rash nor are any of them bent. The center donut pieces (lack of a better word) are nice, no nicks or scrapes. Three of the nuts are decent and have some small nicks from where someone at one time has tried to use a pair of pliers to remove them and I believe the gouges are minor enough where you should be able to file and sand them out. One of the nuts is kind of bad and you may need to source another one. None of the lug nut holes have any "egging out". When I got them, someone had already stripped all of the paint off of them and tried to polish the surface of them. I wet sanded the machine marks off of the faces with 220 and 2000 grit on the outside lips on all of them, in anticipation of polishing them. I just don't have the time to complete them. They could all just be painted (like the were originally from the factory) or finish polishing them. I would prefer to sell these to someone in California ( I'm located in Salinas) and who could come and pick them up as Shipping will probably be quite a bit. I will still work with someone who wants to ship them, but I would have to see what it would cost to ship them to their location. I can send additional photos if needed to whoever sends me a cell Number to send them to. Payment to be made via Pay pal friends and family. $600. OBO + shipping.

[MoreMayhem]

Anyone have a convertible specific rear view mirror they don't want/need? I messed mine up adding an LED light to illuminate the center console like a lot of modern cars have...

[IRON-E]

Dang. No worries bud, thank you for replying

[randywalters]

Hey Randy, if you still have the shell, I'd like to stop by this Sunday and pillage a few things if you're available.

I just saw your post. This new forum format doesn't send me alerts.

The shell got scrapped 20 years ago, all the parts are in boxes or baggies etc.

I recently listed these items on the Los Angeles Craigslist Auto Parts section FYI

Randy

[glnr13]

Posting for an old r3v member, NoelKingSteelo 323 thr3e 5ive 9ine 0808

Style 42 for sale $120 picked up in Downey

[IRON-E]

Randy's Garage Clean Out - Random 1989 325is Parts For Sale

Pick Up Only in El Segundo (i'm not able to ship any of this stuff, must be picked up)

All removed from my creampuff '89 325is that got broadsided in late 2000 with 138,926 miles on the odometer

All parts have been in storage since stripping the car in early 2001 in case i ever needed them, but i no longer have an E30.

All the parts are in very good to excellent condition

I have pictures of most of this stuff but they're too huge to post.

I can send or take pics as requested, and i figured out how to resize them small enough to upload into a PM or Text.

I have limited access to forum's due to work restrictions, but i'm replying to PMs and Texts and Emails the same day usually


-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Coupe Door Seal (Left side, has a 1" tear in the bottom rubber, for the door opening in the body) $130

Coupe Door Seal (Right side, for the door opening in the body) $150

Coupe Door Seals (Left and Right, the one that attaches to top of door) $75 per side

Rubber Seals for Pop-Out Rear Quarter Windows (Left and Right) $60 per side

Latch Assemblies for Rear Pop Out Quarter Windows (Left and Right) $50 each

Coupe Electric Window Lifts '89+ (Left and Right) $100 each

Front Side Window Glass (with aftermarket tint, Left and Right) $100 per side

Map Light Mirror (has the threaded anti-vibration post, but the electrical connector
plug is detached from the wires) $150

13 Button OBC Module (but is missing the white Light Bar Housing) $60

Three Alpine CM5908 Pyramid Radios, Non-Working, but excellent cosmetic condition, w/codes, $100 ea

Overhead Check Control Module $80

Rear Defroster Switch $20

2-Button A/C Control Switch $40

Knob set for A/C (3 sliders & 2 rotating) $20

Ashtray (has a crack on bottom, clean, never touched by cigs or ashes) $30

Cigarette Lighter (Like New - Never been used at all) $30

Glove Box w/latch & lock & a working key $80

Light for Glove Box $10

Center Console (but with cracked right arm foam, glueable, covering is intact though) $80

Rubber Accordian Boot Cover for Handbrake Lever $30

Front Seatbelts w/Retractors (Left & Right) (No Seat Receptacles though) $60 each

Bottom Threshold Seatbelt Slider Rails (Left & Right) $20 ea

Plastic Door Sill Scuff Plate Cover (Left & Right) $30 ea

Third Center Brake Light (Surface Mount, Tan) $60c

Interior Reading Light $20

Overhead Grab Handle $10

Alpine White Fuel Door (has small chip in edge) $40

Alpine White Brake Duct Inlets (yellowed from age) L&R $60 each

Plastic Inner Brake Duct Tubes w/temp sensor $60 for the pair

Fog Light Assemblies with bulbs and sockets (pitted lenses) L&R $120 pair

L&R Headlight Grilles $50 each side

Pair of Horns $30 for both

Trunk Floor Mat $60

Trunk Plastic Threshold Cover $60

Trunk Inner Left and Right Rubber Side Liners $60 per side

Trunk Battery Cover Tray (i have 2 of these) $30 each

Cover for the Battery Cable in the trunk $30

Tool Kit, excellent condition $100

Light for License Plate $10

Under-Hood Sound Deadening Mat $60

3 Chromed Center Cap Waffles for 14" Basketweaves, and some cap parts $60 for all

Brand New Fuel Pump Assembly (spare, Never Installed) from BMW Dealership (# 16 14 1 179 992) $300

Momo Hub Adapter for steering wheel (Excellent, Complete, Stamped K 2006) $80

Momo Hub Adapter for steering wheel (no screws, no button ring, Stamped C 2006) $60

Brand New in Box K-Mac Stage 1 Camber / Caster Adjuster Bearings $300

Set of 4 Brand New Original Genuine German Ronal 15x7.5 ET25 ACT-LS Wheels (2003 production) $1,100

1 Ronal ACT-LS Center Cap - Brand New with ACT Badge and Sealing Ring $80

1 Ronal Center Cap - Used, good condition with some small nicks, w/ Ronal badge and Sealing Ring $60

2 Ronal Replacement Snap-In Inserts (that badge would be glued to) $20

3 Sets of Ronal Security Screws with Tool $40 per kit

2 Front Ground Control Springs, used, 450 lb rate (Eibach # 600.250.450 2.5" ID) $100 /pair


Pick Up Only in El Segundo (i'm not able to ship any of this stuff, must be picked up)


SOLD - Pair of Drip Rails, Complete, left and right sides $200 SOLD
SOLD - Pair of Sun Visors $60 SOLD
SOLD - Pair of A-Pillar Trims, left and right $60 SOLD
SOLD - Ellipsoid Headlights Complete Set $200 SOLD
SOLD - Rebuilt Driveshaft $300 SOLD
SOLD - Aluminum Lower Window Trims, left and right $60 SOLD
SOLD - Side Mirrors, Alpine White, $200 /pair SOLD
SOLD - Tail Lights, like new, w/covers, $200 /pair SOLD
SOLD - LSD Diff 3.73 $400 SOLD
SOLD - Front Valance, Alpine White $150 SOLD
SOLD - Front Fenders, Alpine White $300 /pair SOLD
SOLD - Hood, Alpine White, immaculate $200 SOLD
SOLD - Alpine White Trunk Lid $200 SOLD
SOLD - Rebuilt Driveshaft $300 SOLD
SOLD - Pair of rear quarter pop-out windows, $300/pair SOLD
SOLD - CM5908 Pyramid Radio, (#4 of 4) Non-Working, excellent cosmetic condition, w/code $100
SOLD - Knee Panel under steering column $60 SOLD
SOLD - Two New-in-Box OEM Rear Wheel Bearings from Dealership $40 each SOLD
SOLD - Battery Hold Down Bracket w/long bolt, like new $10 SOLD

Hey Randy, if you still have the shell, I'd like to stop by this Sunday and pillage a few things if you're available.

[m3clutch]

ordered an oil fiter housing off ebay, looks like condor threw one up so I snagged it. 80 bucks shipped seemed reasonable. Kinda wanted to buy a new one...just because, but I'll put the money towards more resto-mods!

[thejaredhuang]

excuse my newbness but is it a g240? I have one from an m42 but I’m not sure on compatibility if anyone can chime in

Thanks, I believe it won't work for me as the bolt pattern is different.

[Balleristic31]

Anyone have an M42 engine wiring harness lying around?

[m3clutch]

For what engine?

m20 on my 89 325i!

[prisonerofdoom83]

Anyone with a 84-86 318i manual trans and/or driveshaft?

Also looking for a manual pedal box from any E30.

excuse my newbness but is it a g240? I have one from an m42 but I’m not sure on compatibility if anyone can chime in

[thejaredhuang]

Anyone with a 84-86 318i manual trans and/or driveshaft?

Also looking for a manual pedal box from any E30.