University of Maryland Meet?

[trackbball21]

damn I have a brunch for track at 10 am. hopefully it doesn't last long.
Brody- I am going to the MVA for round three tomorrow to try to get my tags. Hopefully I will get them tomorrow then I'll be driving my car finally.

[evil_twin]

Stephanie and I will be meeting at the park.

[thereisnoyun]

awesome, Thanks brody. Much smarter option than mine. We should ahve a head count of whos going to meet at hte park. For those that havent pm your email, continue to do so, so we can build up the local mailing list.

1.) Yun - 325i schwartz vert.
2.) Anch - 325i calyso sedan
3.)
4.)

[evil_twin]

Cool. Thanks for the address. Sounds like a plan.

SilverSleeper, remember to pull the goo out of the rear fenders before you roll them...

Let me know what tools you guys need, and I will see what I can source or what I have.

[TexasTerp]

Alright everyone, Here is the link to the Park. Make sure to take a look at the Satellite Map too. There is a light for Calvert Road on Kenilworth 201 that leads straight into the park that the "standard map" doesn't show.

Calvert Road Park

If you have any questions contact either myself or Yun. Just after reading through all the meet time and info I say we have our "mini-meet" as follows:

Place: Calvert Road Park
Arrival: 10:30am
Depart: 11:45am
BYOB and Food. There will be at least one grill there (mine) although I'll have to bring my smaller grill since the smoker isn't exactly "portable" so If anyone wants to bring another that will great. I'm gonna assume traffic is going to be a nightmare setting up so we should leave together about 15 til just to be safe. It's literally a 2 min drive from the park to campus. I'll have my tools available and everyone should bring whatever tools and parts they want to work on our cars. I know I'll be doing a lot of work!

- Brody

[thereisnoyun]

I'm literally 3 minutes away from campus.

EDIT: There is a park right around the corner from my house with plenty of parking and I can bring my grill. The Park is right off of Paint Branch and leads directly to the main entrance. It's a perfect spot for a meet. And since my house is just a left turn away I can bring out whatever tools we need. not to brag but it's the best option we have available and it's really easy to get to, that way we avoid any illegalities and whatever else we would need to worry about.

I'm not gonna be able to stay at the meet because of my Xerxes Performance, but anything before hand will be fine!

sounds like a plan, post up the address please.

[TexasTerp]

I'm literally 3 minutes away from campus.

EDIT: There is a park right around the corner from my house with plenty of parking and I can bring my grill. The Park is right off of Paint Branch and leads directly to the main entrance. It's a perfect spot for a meet. And since my house is just a left turn away I can bring out whatever tools we need. not to brag but it's the best option we have available and it's really easy to get to, that way we avoid any illegalities and whatever else we would need to worry about.

I'm not gonna be able to stay at the meet because of my Xerxes Performance, but anything before hand will be fine!

[thereisnoyun]

Lets do it! But we need a place near there to meet up before hand. Last year I went, there was a huge line to get it.

yea, thats why I say meet up at my place. Then we all go together. Say 11am?

[silversleeper]

If anyone coming has a fender roller, it would be much appreciated if you could bring that along so I can finally stretch/pull/flatten my fenders and stop cutting up my tires.

[evil_twin]

Lets do it! But we need a place near there to meet up before hand. Last year I went, there was a huge line to get it.

[thereisnoyun]

unfortunately, I have no driveway. I use my friends garage down teh road. Wrenching is possible, at teh apartment parking lot, but it'll be a bit illegal.

I only have a small bbq grill, so if anyone has any of those portable grills we need to coordinate it better.

Hell if we really want to do some wrenchign we could just do it at the meet. Its an open parking lot. We can bring out the tools.

What we should do even is to just go there, find a parking location, set up sme portable bbq stuff going, and do the wrenching there, while we mingle. If that is possible. Kind of like having our own diy meet/bbq/cpt. I think we have a better chance of attracting pretty females for amit that way. :P

[evil_twin]

Exactly. I think we should meet up somewhere AROUND the CPT meet, because we have a lot of people coming from around the area. We need to get there early so we can have a decent parking spot with the other BMWs and so we can actually get a good line up.

[silversleeper]

Everyone remember to bring chairs and some drinks.

Drinks as in... non-alcoholic beverages... at least for the meet, correct?

:p

We should organize this better, and go "together" or at least know where each other will be at. Or else, I have a feeling we will be super scattered. I live in college park, about 1.5 mile away from campus right off the beltway, those that want to go together we can meet at my place. and you can pm me for direction. We can even do a bbq just for the e30 group if desired. well LMK if this is of any interest.

This sounds like a plan... I'm up for a BBQ.

Some things we can think about discussing:

- Meeting at thereisnoyun's crib PRIOR to the CPT meet (set time and place)
- Meeting at thereisnoyun's crib AFTER the CPT meet (set time and place)
- BBQ? List items each individual will bring for the BBQ?
- Beer? It ain't a party without beer... maybe a BYOB deal? I am more than willing to provide beer to the minors in the case they are attractive females.
- Parts? Who doesn't like drinkng and wrenching? Maybe (depending on the time the CPT meet is over) we could have a install-fest or something. If you have something you need help installing or some maintenance items to check off, bring them along? Gives the folks that don't enjoy sitting around and talking to strangers something to do? ;)
- If we do the parts/install thing, then maybe list the tools you can provide or what have you.


I duno... just throwing out some ideas. The parts thing may not even be a possibility depending on thereisnoyun's HOA and parking lot situation.

[evil_twin]

We should... Good thing we have a mailing list to do that :-P

[thereisnoyun]

We should organize this better, and go "together" or at least know where each other will be at. Or else, I have a feeling we will be super scattered. I live in college park, about 1.5 mile away from campus right off the beltway, those that want to go together we can meet at my place. and you can pm me for direction. We can even do a bbq just for the e30 group if desired. well LMK if this is of any interest.