Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Finally found the problem, just like kneipe Meijer said the metal plate between his he transmission and engine has a little play , I loosened all the transmission bolts and start bolts , didn’t remove...
- Likes 3
-
Yeah I feel like it has to do with that metal plate , I’m gonna try that...
Leave a comment:
-
Installed a NEW starter last night and it still didn’t work , it’s still making a whining / grinding noise like it’s not meshing properly with the flywheel. I’ve ran this flywheel before with...
Leave a comment:
-
No it’s a JB racing single mass aluminum flywheel , I’ve used it before and it worked just fine...
Leave a comment:
-
I didn’t disconnect the wires from the starter when I first removed the transmission so it could not have been that...
Leave a comment:
-
I tested the starter and it was working , I even tried a different starter I had lying around and it did the same thing . The transmission was on when I tried turning it on. I don’t know if it something...
Leave a comment:
-
E30 starter is whining but does not crank flywheel ?
M20B25
Recently installed a new clutch and I also made sure to install the metal plate that goes between the engine and transmission . Made sure my clutch was aligned with a clutch alignment...Last edited by Obito22; 04-18-2024, 09:36 AM.
-
Does my flywheel need to be replaced or resurfaced ?
I recently installed a spec stage 3 clutch kit along with a jbr aluminum flywheel , everything ran fine for about 200 or so miles until I was started having trouble getting into gear , there was a lot...3 Photos
No activity results to display
Show More
Leave a comment: