Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Makes sense. Other cars I use a different expansion style tank but like you said that back port may be an issue. You could really use any type of expansion tank on any car if you know the volume need...
-
It might be best to use a bmw tank off the back port in that case. Hard to tell what will clear without it in hand...
I plan on using their tucked radiator for cooling....
Leave a comment:
-
Can I eliminate the line at back of the waterpump and run a traditional overflow tank off of a chase bays filler neck?...
Leave a comment:
-
Lucky for me I took the intake off and back port was already plugged. So need the m12 plug... 1.5 pitch didnt thread so must be 1.75.
Found some injector issues while I was in there. Now...
Leave a comment:
-
I like pics to help others later on.
From this post it would appear
2 is feed
3 is return
I have to make soft lines up and havent crawled under the car but...
Leave a comment:
-
M50 heater core deleted coolant routing
With this project the heater core is gone and thats ok. Im trying to figure out the proper way to route coolant without it though. My waterpump is already fitted with AN ports for the rafiator.
...
-
Yes its the dual master!
Im not sure if they are the same TB... do you have a pic by chance? I can take one of mine later...
Leave a comment:
-
Thanks for replying!... ill be running no booster with a chasebays master.. so booster isnt an issue....
Leave a comment:
-
Which Throttle Cable e30 with m50 swap? Pics of setup
This forum is full of knowledge but I am seeing so much contradicting info on throttle cables. I see e34, e36 and a few others
Does anyone have a pic of what they have done and the cable...
-
Lol.. shes excited.... she didnt know she got caught in the pic or she would have posed for it...
Leave a comment:
-
You are the man! This was better than any info Ive been given yet. Can find all the part numbers I need here...
Leave a comment:
-
Hadnt heard of that yet.. thank you.
1st BMW project so trying to find all the hiding spots for info...
Leave a comment:
-
Is there a what size bolt thread?
Other forums Im on for different platforms have a list of nut and bolts for ease of replacement. Hoping there is one here.
In the short term my inherited project has no clutch master hardware...
-
I figured out by looking through the pictures of stuff I need that the starter cable is where the 2 wires to the e30 fuse box go. At the least Ill need to find an old clamp to put on there so it has...
- Likes 1
Leave a comment:
-
Im working with a mess
I did figure out that there was the old e30 fuse box wiring in place and thats what my mystery red wire was for. It was the m50 fusebox wires.
Now...
Leave a comment:
-
Sorry to revive this but Im working on an inherited e30.
I just got a proper e30(1989) distribution block and am not understanding the wiring.
What powers the posts? When you...
Leave a comment:
-
Help me tackle this inherited e30 m50 swap car
Long stgory short its basically stripped except for the harness in place with the motor mounted. I have wiring that I think goes to a distriubution block still hanging loose and other questions
...
No activity results to display
Show More
Leave a comment: