Coolant Hose Questions

Tarek,

Just saw your question about part #16131177514. I do still have it and coincidentally just got it down off the shelf with plans to list it on eBay. Price is the same if you are interested....

[cory58]

Lengthy thread on importing located in the Touring section. If the answer is not in the thread, it might help to post your question there because many Touring owners have imported their cars.

[cory58]

THANK YOU! Don't know how I still missed that diagram on realOEM after 10 minutes of searching. Also apologize for my original note not being clear - even though I mentioned the secondary thermostat,...

[cory58]

I'm replacing part number #13 from the diagram below on my 07/91 cabrio (BMW par #11531722743). I did the same thing on my 10/88 touring last year and this hose connected directly to one of the heater...

[cory58]

Regarding the Febi part mentioned in the OP, I have used Febi parts with no problem on my Bimmers, but not control arms. I don't know the price difference between Lemforder and Febi, but if you need...

[cory58]

Member uturn sent the helpful info below in a PM, so I thought I'd post it for anyone else going through this.


1. holding tool bolts in after you remove the 6? 8? Pulley holding bolts....

[cory58]

Regarding the LC Wylie bracket conversion, don't forget that you also have to modify the lines to/from the compressor.

I had Discount Auto AC in Daytona, FL, rebuild the compressor from...

[cory58]

Great info. Thanks for compiling this. Are the "Other"s special models like Alpinas?...

[cory58]

Vincenze and digger - Thanks for the responses!

[cory58]

So I'm in the middle of this project and have a few questions.

1. I bought the crank holding tool Vincenze linked in post #11 above. Only 3 bolt holes (plus the alignment pin hole) in the...