User Profile

[monty23psk]

1. make sure fan blades on the clutch is not installed backwards.
2. What gasket did you use for the thermostat housing?There is a small passage that is used for bleeding and if clogged, you will...

[monty23psk]

I can't wait for this. In regards to crimpers, I used this one https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 as after much reading, too many negatives....

[monty23psk]

I started a project at the start of Covid to redo my sound deadening in the interior, starting with driver door. Very slow project to say the least. I have removed all the peel and seal, this took the...

[monty23psk]

What pics you looking for. I have the original 1 piece on the ca, and only the 2 side pieces still in their packaging....

[monty23psk]

I also found this to help out with selection. I have experience urethane under constant heat is not long lasting.
...

[monty23psk]

This is good to know. I have the airbag model, like you, a '91. Will look at this as an option if I don't go aftermarket....

[monty23psk]

Mine is bad and while sometimes a NOS appears or even a low mileage, they are around $100. I debate the stiffness, but I have a stuffer suspension in my car so better feedback might be better for me....

[monty23psk]

BMW sells the linkage with it all included but might be NLA. Other option besides getting it used, it to buy the coupler in a urethane or other composite material and you do the work to remove the screws...

[monty23psk]

Just wow. Props to you. What brakes you running in the front and rear?