Spherical rtab

[hopeful]

https://a.co/d/ftBxf79

Something like that...

[hopeful]

Does anyone happen to have access to dimensions of all kinds of OEM spherical bushings? If so there's potential that there's an OEM bushing that gets made into spherical by the aftermarket and would fit...

[hopeful]

I'm wondering if this would work? It's listed for our cars?

https://www.ecstuning.com/b-uro-part...321138722~uro/

But I've never heard anyone...

[hopeful]

Hate to get flamed for bumping an old thread.., how did you find the 245/45r16 on style 5's? And how did you do it? Looking to run 245/45r16 R888 square on my redrilled style 5's....

[hopeful]

Respectfully, I don't think the subframe risers work exactly as you've described here. The relationship of the pivot point going up by 12mm is significantly different than 12mm of ride height.
...

[hopeful]

I'm running the condor subframe riser bushings. The outboard ones are the impossible ones.

[hopeful]

You'd definitely be accessing this from the differential side of the beam.

I've had no luck getting to the tightening nut, only the bolt head. I ended up asking the alignment shop to mark...