I got an S54 power steering pump to fix that as the S54 filter housing has a different mount. I know others have used the S54 filter housing to get the cooler lines for a Zionsville cooler.
...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Last edited by parkerbink; Today, 04:53 PM.
-
The pulleys keep doing this (sitting with insufficient tension)
...
Leave a comment:
-
I found the defelction pulley & ordered one, I have tried a belt size down & 2 up, all come off. I have 4 "OEM" tensioners (URO, Febi etc) they all cannot keep tension (land over 1/4"...
Leave a comment:
-
Sorry, I did not see your post. I'm not sure what a deflection pulley is, I have an ActiveAutohaus Rotrex C38 SC that has 2 additional pulleys.
...
Leave a comment:
-
This is "IMG_8314" by Jeff Jeffers on Vimeo, the home for high quality videos and the people who love them.
- Likes 1
Leave a comment:
-
Got everything together, damn pump is defective (noisy) but works, took a drive, the car is pretty awesome!!!
Ordered a reman ZF, supposed to come in Wednesday.
Leave a comment:
-
Soooo the S54 hose is totally different & cannot fit. I called a hose repair place 32 miles away, they insisted they can swap the banjo the S54 pump needs to my hose, I drove there & (A) the woman...
- Likes 1
Leave a comment:
-
I had the audacity to think I'm, driving TODAY!
https://vimeo.com/920260911?share=copy
Then this....
https://vimeo.com/920261629?share=copy
Turns out,...Last edited by parkerbink; 03-06-2024, 07:12 PM.
Leave a comment:
-
-
-
All pulleys are stock, bigger belt is due to the supercharger.
So, thanks to the difference in the S54 oil cooler housing & M52, the power steering pump mount is different & the alignment...
Leave a comment:
-
-
I have an s52 with s54 oil filter housing. I'm losing belts, has anyone had that happen & if so what was the solution?
Leave a comment:
-
It's similar to this, not sure on advantages, more air in can't hurt.
https://autotalent.com/products/high...9582359&utm_me...
Leave a comment:
-
Belt broke, took the AC belt out. New tensioner that came with the SC froze.
Took all the other pulleys with it. The PS has chips. Water pump has a large crack.
...
Leave a comment:
-
What size do I need? The stock are 50.8mm. I think the ones the spacer came with are about 65mm but did not measure. What about nuts?...
Leave a comment:
-
15mm spacer in. Except losing the short stud lock, I like it.
...
Leave a comment:
-
Nope, just the back 2. I'm ok with the front.
I ordered 15mm from Amazon, if they are wrong, I'll send them back and get the next direction indicated.
Leave a comment:
-
2" to the roundel, 1.5 to the lip.
1.5= 38.1 mm, thinking I don't want to be all the way out so 30mm?
https://www.amazon.com/BLOXSPORT-Hub...-72-56mm-12x1-...
Leave a comment:
-
No activity results to display
Show More
Leave a comment: