Hi guys bought some 18" BBS LM's off a friend who had it on his E36 M3. As im going through an engine swap im unable to take the car for a drive to see if its rubbing anywhere etc...
wheel specs are:
18 x 8.5 ET30 (all 4)
tyre specs are:
215-40-18 fronts
225-40-18 rear
tyres will need changing anyways so my questions are:
1) can i widen the front to a 225-35 or keep at 215-40. i dont want any rubbing especially on inner guard plastics when turning
2) whats the best tyre set up for this wheel spec ?
ive mounted the fronts without any spacers and rears have a 15mm spacer (225 tyre is sitting close to the guard, hasnt been rolled)
thanks for any advice
current 225-40 rear tyre
old 235-45 tyre
wheel specs are:
18 x 8.5 ET30 (all 4)
tyre specs are:
215-40-18 fronts
225-40-18 rear
tyres will need changing anyways so my questions are:
1) can i widen the front to a 225-35 or keep at 215-40. i dont want any rubbing especially on inner guard plastics when turning
2) whats the best tyre set up for this wheel spec ?
ive mounted the fronts without any spacers and rears have a 15mm spacer (225 tyre is sitting close to the guard, hasnt been rolled)
thanks for any advice
current 225-40 rear tyre
old 235-45 tyre
Comment