Announcement

Collapse
No announcement yet.

CO: 1989 325 sedan track car for part out

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CO: 1989 325 sedan track car for part out

    IF INTERESTED EMAIL ME, PLEASE NO PM'S!!!
    To email me, click here





    I'm offering my 325 sedan track car for parts. I've purchased an E30 M3 that will do some track duty, so this guy is on it's way to a new home. See the pictures and description below for more information!:readopt

    Details: I bought this car in 2006 in California and shipped it to Germany. Since I lived about 45 minutes away from the Nurburgring, my intentions for the car were to put quality springs and shocks & good tires then do as many laps as I could afford. As you can see by the pictures and description below, it spiraled out of control into a bit of a monster. If there are any parts you are interested in, please feel free to email me!





    Pictures:

















    Specs:

    Powertrain
    For sale add: http://www.r3vlimited.com/board/showthread.php?t=331820
    -S50B30 powertrain. Pulled from a french 94 M3 that was crunched in the rear with a bit of damage to the front as well. I started it myself while still in the donor car.
    - ZF 5-speed from donor car
    - VAC motorsport 24v oil pan baffle
    - E34 oil pan
    - E30 M3 driveshaft, rebuilt/balanced summer 2010 w/ E34 M5 guilbo
    - AKG motor/trans mounts
    - BMW Motorsport 55c thermostat
    - OEM S54 MCoupe 3 core radiator. Distilled water & water wetter for coolant
    - VAC motorsport oil cooler with -10AN lines
    - Joe Gibbs racing 15W50 motor oil
    - AKG DTM stage 2 shift lever
    - UUC DSSR modified to fit
    - Silver label 075 EWS ECU from the motor including the key & cylinder sitting in a box.
    - Red label 075 Non-EWS ECU in the car
    - H&H Alpha-n chip (ECU + VANOS) (not in the car, currently installed in spare silver label 075 ECU)



    Chassis/Aero
    - DTM Fiberworks fender flares.
    - Rear wing I traded a friend for a full milk crate of assorted liquor bottles. Uprights leading into the trunk floor on either side of the license plate.
    - Sunroof and mounting tray completely removed
    - Carbon Fiber sunroof plug bonded into the roof panel
    - MHW smoked rear tail lights (for sale add: http://www.r3vlimited.com/board/showthread.php?t=346852)
    - Abrahamsmotorsports smoked turn signals (not sure of the brand)
    - OEM French yellow headlights. All new adjusters, black light surrounds
    - Euro front grills
    - OEM foglight blanks
    - OEM passenger mirror delete
    - E34 AC Schnitzer mirror with cracked glass :(
    - i & iS front lip spoilers stacked to sit flush with the 5/8" birch plywood front splitter.
    - 5/8" Birch plywood front splitter mounted to the front subframe, stachions welded to the chassis & a dozen or so threaded rods from the front valence. Splitter is drilled for 3 different settings:
    -- Sticks way to far out
    -- Sticks kinda far out
    -- Sticks out about as much as the bumper
    Photo of the stanchions for the splitter:



    Suspension
    -AST 5100 E30 M3 struts/shocks (for sale add: http://www.r3vlimited.com/board/showthread.php?t=346867)
    - Swift assist springs 225in/lbs
    - Swift 7" 600in/lb front springs
    - Vorshlag front camber plates
    - Massive Lee 1" roll center spacers (require 17" wheels)
    - brand new E30 M3 tie rods
    - Brand new 96+ E36 M3 control arms
    - Bimmerworld sway bar end links
    - E28 wheel bearings (same as E30 M3, just different ABS tooth count)
    - E30 M3 rear subframe
    - Hypercoil 750in/lb rear springs
    - Ground control rear strut mounts
    - 90mm wheel studs
    --- All of the above have one track day, 300 total miles---
    - Tree House Racing green lollypop bushings
    - Willwood 332mm 6 piston front brakes
    - Willwood 300mm 4 piston rear brakes
    - Functional E-brake, freshly rebuilt
    - New OEM E-brake lines
    - Willwood manual pedals (no booster clearance problems)
    - Willwood front/rear bias adjuster (blue knob)
    - Willwood rear brake pressure attenuator
    - Factory 3.73LSD (could use a rebuild. perfect 4.10LSD w/ fresh redline fluid & brand new OE Mcoupe cover available)
    - E30 M3 steering rack (manual)
    - Sparco looking strut bar (I.E. I believe)
    - Ireland Engineering 25mm hollow front bar. (for sale add: http://www.r3vlimited.com/board/showthread.php?t=346856)
    - Ireland Engineering 22mm rear bar (not hooked up, links included)
    - Ireland Engineering sway bar reinforcements
    - Powerflex RTAB bushings
    - New OE rear subframe bushings (3 years old, 4 track days on them)
    - 18x9.5 et22 CSL replica wheels with 245/35/18 Kuhmo XS tires. Tires still good for street driving, but might not be good for track due to colorado winters.
    IMG_4819 by ericandshovin, on Flickr

    Also:

    - 17x10.5 & 17x11.5 BBS RS wheels: http://www.r3vlimited.com/board/showthread.php?t=320782

    Interior
    - 2 Recaro Pole Position SPG seats (my 36 inch waist is snug) floor mounted on custom (Uwe) E30 specific steel mounts
    - Autopower 4-point roll bar with removable diagonal & horizontal/harness bars (for sale add: http://www.r3vlimited.com/board/showthread.php?t=346853
    - Scroth Latchlink 6-point harnesses
    - AKG DTM stage 2 shifter. AKG knob & custom wood knob included
    - Steering column lowered significantly
    - Sparco 325 steering wheel. 90mm dish black suede finish. Quick release hub also included
    - Massive Brakes Groupe A replica dead pedal
    - Dash lowered & flocked to remove glare
    - No HVAC. Nothing. No lines, heater core, AC etc.
    - Radio delete pannel
    - DTM gauge cluster. I'm not sure if it's real or not, but I purchased it on ebay germany from a guy that was selling a few other E30 M3 race car bit. Guages have part numbers on the back from 87/88 and the wiring looks 25 years old. VDO tach (only new gauge). (for sale add: http://www.r3vlimited.com/board/showthread.php?t=346855)
    - Door panels & rear shelf stripped down to the cardboard core and then covered in black tweed.
    - Original front window, still has break in instructions! (pitted badly)
    - Power windows still fully functional. This is the only source of HVAC, and why I kept them functional. Probably 80+lbs of weight if you wanted to strip the doors.
    Photo's of the seats & dash/cluster:







    Discrepancies:
    - Holes in the rear quarter and doors from the old, black IE flares. Not noticeable from 10 feet away.
    - A bit of clear coat peeling on the hood. A few bumps/scratches around the body. It's a track car, so I never worried much about the paint condition
    -Tacho doesn't seam to be accurate. I set the pin switches for a 6cyl, but it reads low in my opinion.
    - Fuel gauge just pings to full. I just top off the car after every session, and never had a problem.
    - I started to cut the fender flares to fit 275/40/17 slicks, but never completed fitting them as they are just too big.


    Included, but not yet installed:
    - Custom 304SS exhaust. Side exit, no cat, Burns collector, mandural bent tubing. (will be installed prior to sale if the buyer wants)
    - Carbon airbox. Hits the radiator hose, will not be installed by me.







    Price/payment: $varries, make an offer! The price is "best offer" but no time wasters please.

    Shipping:I will gladly ship worldwide after payment is complete (sorry Nigeria).

    Contact:If you have any questions or would like more details, please email me at wmwnwmn at gmail.com, this works much better than PM function


    Again...
    IF INTERESTED EMAIL ME, PLEASE NO PM'S!!!
    To email me, click here

    Thanks for looking.
    Last edited by Eric; 02-09-2015, 01:28 PM. Reason: Car now being parted.
    My E30 v1.0 | v2.0 | v3.0 | My E28 |My E34 | My feedback

    #2
    A little sad inside to see this thing being sold. It was a major part of me getting into the e30 game. Good luck with the sale, hoping for a good new home. Enjoy that m3!
    sigpic

    Rebellion Forge Custom Fabrication

    1988 325is - TrackRat in progress

    Instagram @rebellionforge

    Comment


      #3
      Wow, this might be my new favorite e30.

      whoever picks this up is in for a ton of fun.

      glws
      I like cats.

      Comment


        #4
        Proper build and a good price for the work put into it. Nice work!
        -Brandon
        '86 325es S50
        '12 VW GTI Autobahn DSG
        '03 540i M-Sport (sold)
        '08 Jeep SRT-8 (sold)

        For sale:
        S50 TMS chip for Schricks

        Comment


          #5
          Free bump for a badass sedan. I can only hope mine to be a 1/3 of that guy some day.

          Comment


            #6
            Bump!
            My E30 v1.0 | v2.0 | v3.0 | My E28 |My E34 | My feedback

            Comment


              #7
              Bitchin' car & really good guy selling it. Someone's gonna end up with an awesome toy. GLWS

              Comment


                #8
                That's one bad sedan

                Comment


                  #9
                  Wow, I have always loved this car. GLWS!
                  Originally posted by LJ851
                  kingston is the play by play announcer for this thread.
                  ‘Tis by the grace of God that my cars run!

                  Originally posted by unloadedak
                  #teamross
                  Siobhan's Build Thread - UPDATED!

                  Comment


                    #10
                    emailed you
                    sigpic

                    Comment


                      #11
                      Parting it out if anybody is interested.
                      My E30 v1.0 | v2.0 | v3.0 | My E28 |My E34 | My feedback

                      Comment


                        #12
                        Email sent.
                        Originally posted by kronus
                        would be in depending on tip slant and tube size

                        Comment


                          #13
                          Emailed

                          Comment


                            #14
                            Emailed

                            Comment


                              #15
                              I sent you an email, but maybe all these parts are gone? Looking for suspension and brakes.

                              Comment

                              Working...
                              X