For Sale I have my 1987 325e with an M20b25 Swap. The car was originally a North Carolina Car with 0 rust. It was purchased by a race team in Canada who converted into a racecar and had a professional weld in the cage. I have purchased and made some upgrades. The belts are legal and I just purchased a brand new Oreca Pro Head Restraint seat. Currently it runs in Chumpcar, AER, and WRL. Could easily run in other series. 0 DNF’s has run very reliably.
For Chumpcar I run the car at 455 points and the points are for: Front camber kit (20),Spacers (0) , Engine mounts (10) and two suspension components (0). The suspension components are the rear shock upper bushings.
See below have 16 hours or less of race time.
• Oreca Pro Head Restraint seat
• (2) Front Wheel Bearing (FAG)
• (2) Rear Wheel Bearing (FAG)
• Left Front Lower Control Arm
• (6) Spark Plugs
• Cooling Fan (10")
• Front Brake Rotor (Brembo)
• Rear Brake Rotor (Brembo)
• FPC Front Pad
• FPC Rear Pad
• (2) Spacers
• Dunlap Star Specs (4 hrs)
I have an extensive Spare parts list:
- Parts car will full drivetrain M20b25
- Spare transmission
- Thermostat and gasket
- Alternator belt
- Differential seal
- Transmission seal
- Axle nuts
- Spark plugs
- Drive shaft guibo
- Intake and exhaust manifold gasket
- Rebuilt head (machined and new valve guides, never used)
- Injector caps (injectors have been cleaned and flow tested professionally)
- Rear wheel bearings
- Front Wheel bearings
- Rear caliper springs
- External fuel pump
- Axel boot kit
- Tie rods
- Shifter bushing kit
- Rear sway bar bushings
- Alternator
- Starter
- Ignition wires, coil, cap and rotor; spark plugs (16 hrs)
- 153 DME (ecu)
- Rotors and pads (16 race hrs)
- Rad hoses
- Braided brake lines
- Drive shaft
- Injectors (4)
- Thermostat
- Fuel filter and Pressure regulator
Car is Located in Cleveland,Ohio
Price $10,500
If you want any specific pictures please let me know, or any questions please let me know.
For Chumpcar I run the car at 455 points and the points are for: Front camber kit (20),Spacers (0) , Engine mounts (10) and two suspension components (0). The suspension components are the rear shock upper bushings.
See below have 16 hours or less of race time.
• Oreca Pro Head Restraint seat
• (2) Front Wheel Bearing (FAG)
• (2) Rear Wheel Bearing (FAG)
• Left Front Lower Control Arm
• (6) Spark Plugs
• Cooling Fan (10")
• Front Brake Rotor (Brembo)
• Rear Brake Rotor (Brembo)
• FPC Front Pad
• FPC Rear Pad
• (2) Spacers
• Dunlap Star Specs (4 hrs)
I have an extensive Spare parts list:
- Parts car will full drivetrain M20b25
- Spare transmission
- Thermostat and gasket
- Alternator belt
- Differential seal
- Transmission seal
- Axle nuts
- Spark plugs
- Drive shaft guibo
- Intake and exhaust manifold gasket
- Rebuilt head (machined and new valve guides, never used)
- Injector caps (injectors have been cleaned and flow tested professionally)
- Rear wheel bearings
- Front Wheel bearings
- Rear caliper springs
- External fuel pump
- Axel boot kit
- Tie rods
- Shifter bushing kit
- Rear sway bar bushings
- Alternator
- Starter
- Ignition wires, coil, cap and rotor; spark plugs (16 hrs)
- 153 DME (ecu)
- Rotors and pads (16 race hrs)
- Rad hoses
- Braided brake lines
- Drive shaft
- Injectors (4)
- Thermostat
- Fuel filter and Pressure regulator
Car is Located in Cleveland,Ohio
Price $10,500
If you want any specific pictures please let me know, or any questions please let me know.
Attached Files
Comment