Announcement

Collapse
No announcement yet.

Difference between convertible springs and other models

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Difference between convertible springs and other models

    Looking to get new springs and want to know if theres a real difference between the models. I see the vert springs don't lower the rear as much. Not sure if I should get the vert specific springs or go with the sport or race springs. Anyone have some input?


    #2
    If I was you.....I'd call H&R, and when they sales guy says he has no clue, ask to get transferred to "engineering" and pick their brain. They will know if the spring rate/length is different.

    I have seen some verts with saggy asses, so maybe they are different.
    Originally posted by Matt-B
    hey does anyone know anyone who gets upset and makes electronics?

    Comment


      #3
      Verts have lower rear arches and more weight so they are generally lower in the rear and running regular sport or race springs will lower a vert more than a sedan. When I got mine, it had Eibach springs on it which lowered the car excessively and would bottom out regularly because the rates were too soft for the ride height. I then switched to H&R Race springs which have an aggressive drop on the vert but are much stiffer than Eibachs so they work well. Adjustable rear subframe is recommended when going that low. If I wanted to raise the ride height and improved ride quality I would definitely get vert specific H&R's.
      "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

      85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
      88 M3 - LACHSSILBER/SCHWARZE
      89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
      91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

      Comment


        #4
        I have those cabrio springs on..well, my cabrio...and they are just right IMO. They are a "sport" lowering spring that are slightly different to compensate for the weight difference in the cabrio. I doubt you'd notice the difference though if you just went with regular sports.

        I started with Biisteins and drop hats, then switched to Konis (do not get the front cabrio koni as it is not externally adjustable) and removed the drop hats cause my mud flaps were dragging.

        It suits my taste and driving style perfectly.
        Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

        https://www.r3vlimited.com/board/sho...86#post4944786
        Alice the Time Capsule
        http://www.r3vlimited.com/board/showthread.php?t=360504
        87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

        Comment


          #5
          I was driving these vert specific springs for a few years until a rear spring broke. It's a 1.4" drop all around so was looking to keep something similar.



          After looking over some older photos I can see that the rear end is tucking compared to the front end. Maybe those very h&r springs would be a better option and hopefully be better for the weight in the rear end.

          Comment


            #6
            I don't know how many people mess around with rear spring pads to slightly alter rear height? Running no spring pads or even as many as 3 on each side makes a difference and might be enough to prevent buying new springs in some cases.
            Never argue with stupid people, they will drag you down to their level and beat you with experience. -Mark Twain

            Comment


              #7
              From what I understand H&R convertible springs are the same as H&R iX springs. They are the same spring rate as H&R sport but do not lower the car as much.

              I found sport springs were too soft, so I ended up with H&R race. Suspension does not feel terribly stiff to me, but I do not drive on bad roads, nor is the car a daily driver. I needed to add additional spring pads in the rear to raise up the back to an acceptable level. Even with that, the car is still on the low side to be an entirely sensible every day car.

              Comment


                #8
                H&R Race springs have more of an even drop front to rear and not as much forward rake like most sport springs so the rear will appear lower than the front. I installed extra spring pads in the rear and removed one up front for a little more forward rake. The back is still low though. I might install another pad or install an adjustable rear subframe.
                "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

                85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
                88 M3 - LACHSSILBER/SCHWARZE
                89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
                91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

                Comment


                  #9
                  I'll probably end up going with the vert sport springs but with my st springs I used the e90 drophats and the thinnest spring pads for the front and the thickest for the rear. The car sits pretty even just the rear wheels tuck more than the front.

                  Comment

                  Working...
                  X