Announcement

Collapse
No announcement yet.

Window switch breaker wiring?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Window switch breaker wiring?

    Hey everyone. I am in the process of building my car into a stripped out track/weekend car. I pulled a ton of wiring that isn’t necessary, and in my haste I believe I pulled out the window switch breaker wiring. I still have it thankfully, but I have no idea where it connects.

    Can anyone point me in the right direction?

    #2
    Will be two 90° female spade plugs. Some models had them in the button bank above the radio, some had them under the shifter console. Green wire with blue stripe.
    john@m20guru.com
    Links:
    Transaction feedback: Here, here and here. Thanks :D

    Comment


      #3
      Yup, I still have that harness thankfully. I pulled it from the car entirely, so I don't really remember where it attaches to in the car. There is a power distribution block under the dash, and I have a feeling it plugs into that, but I don't know which one if it does. Even just knowing that would allow me to just wire in my own breaker as I really don't want to use the button and don't have a spot for it anymore either.

      Comment


        #4
        One end goes to window switches, other end goes to terminal Q (center) in the C320 Acc Connector (near steering column on inside of firewall)

        Comment


          #5
          You my friend are awesome! I have searched and searched and searched and couldn’t find an answer: I was thinking I was going to have to jus treat all the connectors at this point.

          Comment


            #6
            Download the PDF's - it's all easy peasy
            Originally posted by Matt-B
            hey does anyone know anyone who gets upset and makes electronics?

            Comment


              #7
              the pdf's don't show you which connector goes where physically...Trust me, I just spent a nearly a week pinning out and wiring a megasquirt harness to my m52 harness, I know how the diagrams work...

              Comment


                #8
                Originally posted by vpilarrt View Post
                One end goes to window switches, other end goes to terminal Q (center) in the C320 Acc Connector (near steering column on inside of firewall)

                So after searching and searching and searching for a c320 connector, i figure dout that you must have meant c302. Now that i have figured that one out, i can clearly see where "Q" is. My question now is, where does the other plug end go? There is a second connector on the breaker switch wire and I am not sure where that one goes now.


                Thanks

                Comment


                  #9
                  Originally posted by haaken675 View Post
                  the pdf's don't show you which connector goes where physically..
                  At the end of the PDF's there is about 10 pages that show the pin out of the connectors and there is a few "connector locations" pages as well. Some years/models are better than others, but it's all there! I'm not pulling your leg.
                  Originally posted by Matt-B
                  hey does anyone know anyone who gets upset and makes electronics?

                  Comment

                  Working...
                  X