View Single Post
Old 12-04-2017, 05:46 AM   #3
Join Date: Nov 2017
Location: Lithuania
Posts: 7
Factory sensor. Gap is OK. If you connect the crankshaft position sensor to camshaft position sensor the engine starts.

Problem that there is no 5V AC voltage in pins for the connector on the drivers side. Next thing that we will try is to replace the engine harness with a 404 non ews one, and see if it will start

Last edited by backa; 12-04-2017 at 06:23 AM.
backa is offline   Reply With Quote