Announcement

Collapse
No announcement yet.

E39 electrochomatic mirror retrofit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E39 electrochomatic mirror retrofit

    I didn't think this would be complicated but I can't find the wiring diagram anywhere. Ive got a mirror with PN 015313 and it has 5 wires coming out.

    - Blue / Yellow
    - Brown / Black (most likely ground)
    - Red / Black
    - Green / White
    - Gray / Black / with Yellow dots (dashes?)

    Can anyone tell me which wire does what?

    #2
    Mirror wiring 51160001231
    Pin 8&9 clown nose
    Pin 3 12v switched power. Yellow
    Pin 10 ground brown

    Not sure if this helps. I installed a bmw 5 series homelink mirror in my vert.




    Sent from my iPhone using Tapatalk

    Comment


      #3
      Thanks! Do you happen to know the colors of each pin? I dont have the connector, just cut wires.

      Comment


        #4
        NM, figured it out.

        Blue / Yellow - Reverse
        Brown / Black - Ground
        Red / Black - Clown Nose LED
        Green / White - 12v
        Gray / Black / Yellow - Clown Nose LED

        Comment


          #5


          My connections to check panel. Green white to purple white and brown black to brown


          Sent from my iPhone using Tapatalk

          Comment


            #6
            Thank you again! I was looking at those wires as well. Not sure I feel like running all the others up and around just yet.

            Comment


              #7
              Sweet, I just think about doing this!
              sigpic

              Comment

              Working...
              X