Ok, so I'm stuck. I'm trying to remove the damn vibration damper. I've removed the 3 nuts on the side of the guibo I can see (facing the rear). Now, there are 3 bolts left that are attached to the driveshaft and go through the guibo. I've got those loose, but as I turn those bolts to remove them, nothing happens. I keep turning and turning and the bolts dont budge.
If there is a nut behind the bolt, I cannot get to it since the damper leaved very little space to get behind there. I would have to remove the tranny. I know there is an easier way.
Someone please help!!
Some pics:
Too close to the tranny.
Here is what little space there is behind the damper.
Close to the tranny.
If there is a nut behind the bolt, I cannot get to it since the damper leaved very little space to get behind there. I would have to remove the tranny. I know there is an easier way.
Someone please help!!
Some pics:
Too close to the tranny.
Here is what little space there is behind the damper.
Close to the tranny.
Comment