Announcement

Collapse
No announcement yet.

SRS Concepts FCAB

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    will have to dig up the before photos, I am certain they are somewhere on my phone.

    My only concern is these LCBs contain a welded joint, which looks well done, but could be a weak spot.

    Comment


      #17
      Currently running the following:
      - SRS offset CAB
      - e36 non-M3 knuckles
      - 1996 e36 M3 control arms
      - custom e36 on e30 ground control bastard kit that I made


      Here's what my wheel currently looks like. I don't think running just the offset bushing is enough to push the wheel forward especially if you want some tire up front.

      -Dee
      5-lugged turbo 318is Barn car
      IG: @deebelmont

      Comment


        #18
        Looks pretty good.
        I made my own LCABs to fix the hub/wheel well relationship.
        Mine are mediocre, made by me and they have held up to a lot of torture testing. I autocross and track my car as well as drive it to and from work on occasion.
        The ones pictures by SRS look to be better made than mine. They should be a great product.

        Comment


          #19
          Originally posted by ccsdo5 View Post
          Currently running the following:
          - SRS offset CAB
          - e36 non-M3 knuckles
          - 1996 e36 M3 control arms
          - custom e36 on e30 ground control bastard kit that I made


          Here's what my wheel currently looks like. I don't think running just the offset bushing is enough to push the wheel forward especially if you want some tire up front.
          How is the set-up working out after some time with it?

          Comment


            #20
            Would these work with 97+ m3 knuckles and brakes ?

            Sent from my SAMSUNG-SM-G925A using Tapatalk

            Comment


              #21
              Originally posted by jag09 View Post
              How is the set-up working out after some time with it?
              It wasn't bad to drive with in all honestly. I felt comfortable doing about 70mph or so down the highway after I got an alignment. I didn't keep it on my car for long though because having this setup only offered me about 1 degree of negative camber up front.

              Originally posted by 330icrazy View Post
              Would these work with 97+ m3 knuckles and brakes ?
              Yeah they probably would. work with those too. Idk if you can use a non-m control arm or not though. When I tried without the m3 knuckle I needed the 96+ m3 control to get the wheel in the correct spot.
              -Dee
              5-lugged turbo 318is Barn car
              IG: @deebelmont

              Comment


                #22
                Anyone else tried these?

                I’ve asked them about the control arms and they assured me that they work with Non M E36 and E30 control arms

                Comment


                  #23
                  I've tried them with e30 control arms and non-m3 e36 knuckles doesn't move the wheel far enough forward. You can either do '96+ e36 m3 control arms and non-m3 knuckles or e30 control arms with '96+ e36m3 knuckles with them. That's from my experience running 16" wheels on my e30
                  -Dee
                  5-lugged turbo 318is Barn car
                  IG: @deebelmont

                  Comment


                    #24
                    It is impossible To find an M3 E36 parts in my country so I already bought non M E36 knuckles

                    Is it very bad and not centered without M3 CA?

                    Comment

                    Working...
                    X