Not selling them. Just made a set many, many years ago. Keep it simple and it'll work forever. Or spend big $ on an e30 M3 suspension.
Announcement
Collapse
No announcement yet.
E28 535i Hub assembly swap to get 5 stud
Collapse
X
-
Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
-
People have sleeved the e30 4lug struts forever. What I dont know is if they replace the dust cap with a larger ring to support the inner bearing race half? OD on the bearing race support is 43mm. Inner diameter on e30 bearings is 30mm. Inner diameter on M3/E28 bearings is 36mm. The radius on the inner bearing race is 2.5mm.
If you add that up you realise you only have 1mm on each side of the bearing supporting it from pushing in toward the strut! Not enough to make me comfortable!
Just curious how people deal with this or if they just dont care.
Any pictures of the setup you did Lee?-Nick
M42 on VEMS
Comment
-
Even if you had 0.5mm all around. that would be enough of a step to keep the bearing from "sliding" toward the strut. And it is a very precise job. Spindle will be frozen to shrink. Sleeve will be heated to expand. You'll need a good machinist. And nop. No picture.Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
BUY a DTM racecar and be done with it... ;-)Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
Originally posted by Rocla View PostGoogle "bonje hylsa" for sleeve.
EDIT: paradon me, bonje hylsa is for mounting e36 hub.-Nick
M42 on VEMS
Comment
-
Not to highjack the thread or anything, but speaking of sleeving the spindle... http://www.r3vlimited.com/board/showthread.php?t=265863
They will be up for group buy in 2 weeks.sigpic
My 5 Lug Conversion Kit thread: http://www.r3vlimited.com/board/showthread.php?t=265863
5 Lug Conversion Kit Group Buy!! http://www.r3vlimited.com/board/showthread.php?t=281362
Comment
-
The three holes on the e28 strut don't align perfectly with the e30 m3 holes. One of the e28 holes is offset. Also e28 has M10 bolts vs M8 but that could be resolved with a little machining.1986 911 Supercharged Frakenstrat/Stripped
1987 325is Delphin/Black (Olga)
1988 M3 Zinno/Natur (Elsa)
Manual or STFU
E30 Chapter of BMW Car Club of America
E30 Oktoberfest 2017
Comment
Comment