Announcement

Collapse
No announcement yet.

M20 AFM to M30 AFM with 19lb injector questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by nurseklb View Post
    is this mod worth it with an eta?
    no

    Comment


      what can be done to an eta thatwill make a noticeable difference?
      why does it have to be a "dead end"? why not just "end"?

      Comment


        Originally posted by nurseklb View Post
        what can be done to an eta thatwill make a noticeable difference?

        Comment


          Originally posted by nurseklb View Post
          what can be done to an eta thatwill make a noticeable difference?
          replace the engine with something that makes more power. ;)

          seriously, just get a chip. It makes a huge difference on the eta, but that's about all there is. Other "upgrades" are more likely to hurt than to help.
          Build thread

          Bimmerlabs

          Comment


            Sorry for pulling up this old story.
            I bought new design lll 19lb injectors and the 027 M30 AFM.
            My engine is a 88 Supereta with i head and SSSquid 327i 14.5lb chip.

            If I am not wrong I should be good with my chip, right?
            Am I also right that I do not need to adjust the AFM?

            Thanks!
            1990 kashmir beige BMW e30 327i
            1993
            muggello rot BMW e36 M3 Gruppe A Euro
            1990 GP weiss Porsche 964 C2
            1997 schwarz II BMW e36 328iS supercharged

            Comment


              Originally posted by FRODADDY View Post
              Sorry for pulling up this old story.
              I bought new design lll 19lb injectors and the 027 M30 AFM.
              My engine is a 88 Supereta with i head and SSSquid 327i 14.5lb chip.

              If I am not wrong I should be good with my chip, right?
              Am I also right that I do not need to adjust the AFM?

              Thanks!
              I'm not sure if that chip will suit your setup since it's designed for 14.5lb and you're running 19lb .. also you may need few changes in the AFM, better to have a afr gauge ..


              M20B28 Turbo

              My Build Thread

              http://www.r3vlimited.com/board/showthread.php?t=255839

              Comment


                Thanks!

                That's actually what I figured too.
                1990 kashmir beige BMW e30 327i
                1993
                muggello rot BMW e36 M3 Gruppe A Euro
                1990 GP weiss Porsche 964 C2
                1997 schwarz II BMW e36 328iS supercharged

                Comment


                  Don't you need to upgrade your ECU at the same time because the mapping will be different with your upgrade?
                  Current:
                  '88 325ic Silver 5sp
                  '17 Subaru Outback 3.6R

                  Past:
                  '14 Rav4 EV (with tons of torque!)
                  '06 325i Black 5sp
                  '02 S4 Avant Black 6sp
                  '00 Boxster Silver 5sp
                  '98 New Bettle Yellow 5sp

                  Comment


                    So I also ordered a new ECU fro SSSquid.
                    As I am already very happy with his current chip I am curious how it will perform with the new one.
                    1990 kashmir beige BMW e30 327i
                    1993
                    muggello rot BMW e36 M3 Gruppe A Euro
                    1990 GP weiss Porsche 964 C2
                    1997 schwarz II BMW e36 328iS supercharged

                    Comment


                      Originally posted by FRODADDY View Post
                      Sorry for pulling up this old story.
                      I bought new design lll 19lb injectors and the 027 M30 AFM.
                      My engine is a 88 Supereta with i head and SSSquid 327i 14.5lb chip.

                      If I am not wrong I should be good with my chip, right?
                      Am I also right that I do not need to adjust the AFM?

                      Thanks!
                      I am VERY curious about how this will work for you. I have a 88 seta swapped to I w a 173 stock ecu. No chip. greend top inj. idle comes and goes. some days silky smooth other days rough. seems to be rich. Always runs great through the RPM though. sounds like an 027 afm would help. Hows the SSSquid chip? and hows the M30 afm working on it?
                      Now with 2.7i power!!!

                      Comment


                        So is every m30 am a 027

                        If not is there a way to tell the difference?

                        Comment


                          Where do I locate part number?? Searched for any numbers with enough digits,none were found. TIA

                          Comment

                          Working...
                          X