Set of four FVH Concept/Dial wheels
-4x100
-15x7
-et23 offset
-CB66.56/57 by my measurement
-Made in France in 1995
-I believe the specific model may be called the "Concord"
Never seen pictures or mention of these wheels on the internet in any of my searches over the years. Would be curious if anyone can offer additional information on them. Bought them as BMW E30 wheels but found the centerbore wasn't exact and would ideally need a centering ring and I moved past the E30 before using them. Wheels are a grey-silver on the front faces and black on the rear inside. Paint is a 6/10 to me, they could certainly be run as-is as a daily wheel, but there are paint chips here and there and they could use some touch-up to be a 7 or 8, and could use an afternoon of elbow grease to get to a 9 or maybe even a 10. Should be able to fit multiple 4x100 vehicles with appropriate hub rings - VW, Honda, BMW etc. Four FVH concept center caps included.
$150
Pick up only in Stamford, CT moments off Exit 34 Merritt or minutes from Exit 6 I-95. Will ignore any PMs asking about shipping.
-4x100
-15x7
-et23 offset
-CB66.56/57 by my measurement
-Made in France in 1995
-I believe the specific model may be called the "Concord"
Never seen pictures or mention of these wheels on the internet in any of my searches over the years. Would be curious if anyone can offer additional information on them. Bought them as BMW E30 wheels but found the centerbore wasn't exact and would ideally need a centering ring and I moved past the E30 before using them. Wheels are a grey-silver on the front faces and black on the rear inside. Paint is a 6/10 to me, they could certainly be run as-is as a daily wheel, but there are paint chips here and there and they could use some touch-up to be a 7 or 8, and could use an afternoon of elbow grease to get to a 9 or maybe even a 10. Should be able to fit multiple 4x100 vehicles with appropriate hub rings - VW, Honda, BMW etc. Four FVH concept center caps included.
$150
Pick up only in Stamford, CT moments off Exit 34 Merritt or minutes from Exit 6 I-95. Will ignore any PMs asking about shipping.
Comment