My e30

[Joegreen02]

So I bought this car some time ago from a guy in Houston.

He did a lot of suspension work to the car and it handled like it was on rails

So far here is the build

Bilstein b8's
H and R race springs
Garagistic drop hats
Garagistic urethane bushings every where
Garagistic Solid steering coupler
Garagistic aluminum front diff mounts and green urethane rear mount
Garagistic front and rear strut tower bars
2.93 LSD medium case
UUC front and rear sways
ECS clutch and brake lines
Blank rotors ebc red stuff pads
Z3 rack with garagistic mounting kit
AKG motor and trans mounts red
AKG short shifter kit
AKG DSSR
Clutch masters clutch
Condor brass fork pivot
RHD 7lbs flywheel
Ac and power steering deleted
EBay header to 2.5" mandrel bent exhaust with magnaflow resonator and sport muffler
Condor speed shop mspnp2 management tuned by sanoli performance mcallen texas
Afm deleted
Icv deleted
3" cold air intake
Square Motorsport e36 tps adapter
Clutch fan delete
Flexalite 16" fan with controller
AEM eugo with controller
Walbro 255 pump
23.5lb injectors
IRE 8mm wire set
Schrick 284 cam
Febi HD rockers
Condor center vent gauge mount with bosch gauges
Bulgarian made steering wheel
Sparco corsa seats

This is how it was when I first bought it





Current look







My buddy ovi wrapped this plate I built to install my radio







Turned out pretty sharp!

RHD flywheel



Clutch masters clutch



Coupler installed



AKG shifter



That brain
Yes I plan to clean up the wiring now that it's all figured out. If anyone has some clean examples how to do that that would be welcome!



Little interior shot



First ever dyno run
Sanoli performance!!![emoji3590]



Installing this days off!












Sent from my iPhone using Tapatalk

[rzerob]

Is this a street car? If so what are you doing for a HVAC/defroster? I don't know about Texas but in Pennsylvania you can't legally pass state inspection without a defroster.

[Joegreen02]

My e30

Yeah street car not a daily driver though. I installed a little 12v heater for defrost and driving into cold areas. Let me see I have a pick of the unit here somewhere.



It's behind the radio just gotta reach in and flip the switch for heated defrost. Although they don't check for that in South Texas lol

I installed this unit after driving it to west texas in the winter. The complete hvac system was deleted by the PO


Sent from my iPhone using Tapatalk

[cream_e30]

Is this a street car? If so what are you doing for a HVAC/defroster? I don't know about Texas but in Pennsylvania you can't legally pass state inspection without a defroster.

That's wild to me. In Canada you dont even need a defroster.

Sent from my SM-G960W using Tapatalk

[rzerob]

It's behind the radio just gotta reach in and flip the switch for heated defrost. Although they don't check for that in South Texas lol

I installed this unit after driving it to west texas in the winter. The complete hvac system was deleted by the PO
Sent from my iPhone using Tapatalk

That is a good idea. If the HVAC box was completely removed there would be plenty of room for the little heater. Do you have a part number or link for the heater?

That's wild to me. In Canada you dont even need a defroster.

Sent from my SM-G960W using Tapatalk

No visibility out of the front window is a safety hazard. As long as there is a windshield defroster the rest of the HVAC doesn't have to work to pass.

[cream_e30]

That is a good idea. If the HVAC box was completely removed there would be plenty of room for the little heater. Do you have a part number or link for the heater?







No visibility out of the front window is a safety hazard. As long as there is a windshield defroster the rest of the HVAC doesn't have to work to pass.

I dont disagree, just crazy that its law down south and not in Canada where morning frost is nearly year round.

Sent from my SM-G960W using Tapatalk

[Joegreen02]

That is a good idea. If the HVAC box was completely removed there would be plenty of room for the little heater. Do you have a part number or link for the heater?







No visibility out of the front window is a safety hazard. As long as there is a windshield defroster the rest of the HVAC doesn't have to work to pass.

Let me see if I had to do it again I would do this one. I couldn't find the one I bought anymore[emoji2369]

CAR and Truck Heater 12V Under Dash/Speed Switch https://www.amazon.com/dp/B0786RXZMQ..._0XmVCb3BM8VME


Sent from my iPhone using Tapatalk

[Joegreen02]

https://youtu.be/fK0sDnasoGc

Sent from my iPhone using Tapatalk

[Joegreen02]

Sent from my iPhone using Tapatalk

[Joegreen02]

For those that are curious. I work in the oil field and my wife sends me car part porn as the pieces come in lol.

O2 sensor bungs came in.



This guy will eventually be my Screamer pipe



Blow off valve adapter



I'm planning on trying out this super cheap BOV from Amazon since I'm going to be running low boost. Somewhere along the lines of 8 psi maybe slightly more.



More to come. I got a pretty sweet external wastegate coming from precision along with a bunch of fittings and hoses.


Sent from my iPhone using Tapatalk

[Joegreen02]

V band



And the new flange for my precision 3231e






Sent from my iPhone using Tapatalk

[Joegreen02]

Weld on AN10 fittings for throttle body and valve cover



Fittings and hose to go from TB and VC to catch can






Sent from my iPhone using Tapatalk

[Joegreen02]

Some squeezers



A breather



39mm waste gate



More Shiney bits



Turbo blankey



And some customer appreciation! Yay




Sent from my iPhone using Tapatalk

[Joegreen02]

So it begins



Mocking up the exhaust




Sent from my iPhone using Tapatalk

[Joegreen02]

Finally get it all together this evening running pretty good so far


Sent from my iPhone using Tapatalk