Definitive list of vacuum lines / diagram? Late model M20

[AC_Schnitzel]

Looking to replace all of the vacuum lines in the engine bay... here is what I have so far:

• valve cover to the throttle body
• throttle body to the Idle Control Valve
• hoses from throttle body to the brake booster
• throttle body to the EVAP control valve
• intake manifold to the FPR

Am I missing anything? How many meters should I need to purchase to do all of these lines?

[kronus]

you're missing purge valve to charcoal canister.

only the last two are generic vac line; the first two are molded rubber parts and the brake booster line is its own special thing.

[AC_Schnitzel]

you're missing purge valve to charcoal canister.

only the last two are generic vac line; the first two are molded rubber parts and the brake booster line is its own special thing.

Thank you!

[jgilber0]

If your car is all original, you will also need hose clamps or a special tool to reuse the factory clamps.

[AC_Schnitzel]

If your car is all original, you will also need hose clamps or a special tool to reuse the factory clamps.

good call -- yeah they all still have the one time use clamps

[cat97628]

Just ordered the line for the brake booster and it about a meter long and costs about 20 bucks, not cheap but more than enough. Take pictures and don’t screw up like I did. I flipped the hoses coming of the TB to the brake booster and the had to cut off hose I just made because the stupid fittings wouldn’t let go. Still have about 10 inches of hose left over.