5 Lug and Big Brake Kit

[elcoy]

Run authentic BMW brake parts AND swap to 5x120 bolt pattern using this system of precision machined spacers and adapters! Kits are in stock and ready to ship. These parts will let you run E46M3 and E39 540i brakes on your E30, with OEM 5x120 drive flanges. This kit includes all spacers and hardware, along with the OEM part numbers needed to complete the kit. Full picture instructions are also included to answer any and all questions. I have become very familiar with this kit and installed these parts myself on my 91 318is. These are significantly bigger rotors and calipers

Rear on my 318is:



Front:




All parts are professionally machined in the USA using the following materials:

Front Hub Bushings- 4043 Chrome-moly steel

Front Hub Nuts- 4043 Chrome-moly steel

Front Caliper Brackets- 2024 Aluminum

Rotor Spacers- 6061 Aluminum

Rotor Centering Rings- 6061 Aluminum

Hub Centric Retainers- 6061 Aluminum

Rear Caliper Brackets- 2024 Aluminum



Previous kits have been shipped to Germany where they have passed the rigorous TÜV standards. Installation is as easy as replacing a wheel bearing, and retains the stock E30 suspension geometry, unlike swapping trailing arms etc. Shoot me a PM if you have any questions!


Price for the kit shipped to your door including PayPal fees is $515.

[elcoy]

Bump!

[elcoy]

Bump!

[elcoy]

Bump

[elcoy]

bump, ready to ship!

[Metallated]

What do we need to sourcein addition to this kit to make everything work?

[elcoy]

What do we need to sourcein addition to this kit to make everything work?

You basically source your own OEM parts. I don't include them in the kit so people don't have to pay a markup.

Front:
E46M3 (or E36M3) Front rotors and calipers
E36M3 front wheel bearings/hubs

Rear:
E46 Non-M rotors, E39 Calipers
E30M3 or Z4 hubs (Depending on kit you order)
E30 wheel bearings


Brake lines are the only other thing. I found E46M3's work with the front and stock E30 Fronts work in the rear, but other people have found solutions that work as well.

[jph]

I have this kit on the front of my car and it's awesome. I ended up using Z3M stuff in the back but I'm guessing it would be just as great as the front setup. Very happy with mine and was very easy to install on the fronts.

[elcoy]

I have this kit on the front of my car and it's awesome. I ended up using Z3M stuff in the back but I'm guessing it would be just as great as the front setup. Very happy with mine and was very easy to install on the fronts.

Glad to hear it!

[elcoy]

Bump!

[elcoy]

bumppp

[T.Dot_E30]

Is a Brake MC swap/upgrade required with this kit?

[elcoy]

Is a Brake MC swap/upgrade required with this kit?

Not required!

[Zambuzan]

Not required!

Sorry, I'm a bit green but I am interested in a 5-lug swap. So how exactly does this kit install? What exactly are the hub bushings and rotor spacers?

And what exactly do we need in addition to this kit?

Front: e36m3 hubs + struts + wheel bearings? Or just e36m3 hubs + wheel bearings?

And for rear: e30m3 rear hubs or z3?? Those are expensive AF lol.

Thanks in advance.

[elcoy]

Sorry, I'm a bit green but I am interested in a 5-lug swap. So how exactly does this kit install? What exactly are the hub bushings and rotor spacers?

And what exactly do we need in addition to this kit?

Front: e36m3 hubs + struts + wheel bearings? Or just e36m3 hubs + wheel bearings?

And for rear: e30m3 rear hubs or z3?? Those are expensive AF lol.

Thanks in advance.

If you PM me your email I can send you the installation instructions and parts list. That should answer a lot of questions.

Its basically the custom parts you need to run OEM parts from later models on your car. No suspension geometry changes or hacks. Only hubs/bearings and brake parts needed. Z4 hubs can be used on the rear as a cheaper alternative. Yea E30M3 = Pay to Play lol ask me how I know :p