First clarification all my lock tumblers function with my key, and the driver's side door will not physically lock unless the lock motor is removed, then it with lock/unlock/double lock.
next item, my central lock module is new.
ok so I need help figuring out why nothing is attempting to fire the power locks at either door or the trunk. I followed the first step of the ETM to check voltage at the CLU pin 3 to ground and pin 3 to 4 and both show car voltage/12v. I tried the next step of the the ETM with jumper wire and the CLU makes noise but no locks even attempt to actuate then the next step with the CLU unplugged and jumper wires and nothing happens.
what should be my next step? will the driver's door motor being jammed cause the system not to try and fire?
Sent from my iPhone using Tapatalk
next item, my central lock module is new.
ok so I need help figuring out why nothing is attempting to fire the power locks at either door or the trunk. I followed the first step of the ETM to check voltage at the CLU pin 3 to ground and pin 3 to 4 and both show car voltage/12v. I tried the next step of the the ETM with jumper wire and the CLU makes noise but no locks even attempt to actuate then the next step with the CLU unplugged and jumper wires and nothing happens.
what should be my next step? will the driver's door motor being jammed cause the system not to try and fire?
Sent from my iPhone using Tapatalk
Comment