Has anyone done this job with a ix booster? Its hard to tell if its possible with just taking the mc off, or if the whole booster needs to come off.
-
Current:
1989 325i
1988 M3
1987 325ic
Past:
2001 330ci
2001 M3 -
What? no, just unbolt the hydraulic lines, it'll fall to the floor.
tnow, sometimes I just mess with people. It's more entertaining that way. george graves -
I know its only the lines holding the thing on, I'm talking about accessing it to the point where you can unbolt it. Pretty much impossible with the MC on the car. Trying to figure out if the booster will need to come out as well before I dive into it.Originally posted by TobyB View PostCurrent:
1989 325i
1988 M3
1987 325ic
Past:
2001 330ci
2001 M3Comment
-
Get it from underneath the car.AWD > RWDComment
-
I can get at the bottom brake line from underneath, but not the top. Both would probably be possible with a non-ix booster, but alas.Originally posted by Kershaw View PostCurrent:
1989 325i
1988 M3
1987 325ic
Past:
2001 330ci
2001 M3Comment
-
I only work on IXs and that's how I did it. But it's been about 7 years since I did that particular job so maybe I'm not remembering it 100%.AWD > RWDComment
-
Just did this finally. Booster and intake mani all had to come off.
Good times :)Current:
1989 325i
1988 M3
1987 325ic
Past:
2001 330ci
2001 M3Comment
Comment