Announcement

Collapse
No announcement yet.

My 318i M10 "raging avocado"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Some more things done... ;D;D
















    Tractor 318i







    Since i got the car the engine as low power under load, especially around 3000+ rpm, I thought it as the rotor and sparkplugs but recently i took the AFM out and besides being worn out its from a peugeot/citroen car.

    Also the spark plugs when I take them out are flooded with gasoline. I think the AFM is sending a "rich" signal. Its possible to calibrate this AFM for my engine?Rotating the spring in the AFM to make it leaner or do I need a M10 AFM?

    Comment


      #17
      There are some good write-ups about setting the AFM properly. I'd look into those. Are you having to crank your car for a long time to get it to start or something? I'm surprised you'd be covered in fuel.

      Comment


        #18
        The car starts without a problem. The idle seems a bit erratic until it warms up but nothing you would notice when driving. The major problem is that under load i cant get the engine past 3000 or 3500 rpm, with half or full throttle.

        yesterday i turned the wheel spring on the afm to make it more leaner and the sparks look much better, without fuel residue, and it seems to have just a little bit more power

        Comment


          #19
          Wow...my favorite E30 color. Will be watching this build, congrats on the pickup dude!

          Comment


            #20
            With the H&R's installed



            Comment


              #21
              Esta quase Novo!

              Comment


                #22
                Gorgeous

                Comment


                  #23
                  Some pictures of the new rims before stopping the car to rebuild the engine.







                  Comment


                    #24
                    Love it, just clear coat it and leave with that awesome patina.

                    Comment


                      #25
                      Finally start disassembling my engine and it just looks awful. Lots of grime and burned oil and black stuffs.

                      I just wish I had a vapor blasting machine






                      The gearbox and intake side of the engine bay was full of old oil







                      The oil pump had silicone strings inside the pickup plate




                      Bolt :tsk::tsk:


                      Some oil starvation






                      Maybe this is why the car didnt pull right :!::!:

                      Comment


                        #26
                        Car

                        You are on the right track....keep up the good work.

                        Comment


                          #27
                          are you planning on rebuilding it for b00st??
                          1984 Delphin 318i 2 door

                          Comment


                            #28
                            I was reading through your thread and it wasn't until I saw the plate on the car that I noticed you're from Portugal. Which town are you from? I'm from Lisbon moved here when I was 11. Going back to Portugal in June for vacation.

                            Awesome work with the car can't wait to see more progress.
                            1992 325i Convertible - "project"
                            1994 325is - Daily

                            Comment


                              #29
                              Originally posted by DBShiznit View Post
                              I was reading through your thread and it wasn't until I saw the plate on the car that I noticed you're from Portugal. Which town are you from? I'm from Lisbon moved here when I was 11. Going back to Portugal in June for vacation.

                              Awesome work with the car can't wait to see more progress.
                              Im from Porto. Theres a great e30 culture here in portugal :D



                              Originally posted by wworm View Post
                              are you planning on rebuilding it for b00st??
                              Eventually yes... will see :D

                              Comment


                                #30
                                Originally posted by fpimenta View Post
                                Eventually yes... will see :D
                                Ah good good. This will be exciting.
                                1984 Delphin 318i 2 door

                                Comment

                                Working...
                                X