Here you go fucks. THis is what I did today in less than an hr. part #s posted at a later date
REmove cover
undo straps to the blower motor. Helps if you have picks to fit into the holes on the straps. So you dont break them
heres the power wires
can use pic to undo the clip. Has a small hole to poke into. Note the resister is located just below the blower motor. It kinda just slides in underneath. Not really shown in this pic
removed blower motor wo issues. heres now. Installation is the same way.
new resister compared to old
back of resister and how it plugs in
LOOK at where the clip attaches at the back. On my car the clip attached ABOVE the metal strip. Other cars have the clip attaching to the metal strip. If its in the proper place, then you are SUPPOSED TO be able to secure the clip with your hands.
REmove cover
undo straps to the blower motor. Helps if you have picks to fit into the holes on the straps. So you dont break them
heres the power wires
can use pic to undo the clip. Has a small hole to poke into. Note the resister is located just below the blower motor. It kinda just slides in underneath. Not really shown in this pic
removed blower motor wo issues. heres now. Installation is the same way.
new resister compared to old
back of resister and how it plugs in
LOOK at where the clip attaches at the back. On my car the clip attached ABOVE the metal strip. Other cars have the clip attaching to the metal strip. If its in the proper place, then you are SUPPOSED TO be able to secure the clip with your hands.
Comment