If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
now i am getting no spark but fuel. i used the m20 harness with m30 computer. does anyone have a diagram of proper sensors hooked up??
any ideas? thank you
now i am getting no spark but fuel. i used the m20 harness with m30 computer. does anyone have a diagram of proper sensors hooked up??
any ideas? thank you
coil?
crank trigger plug into the harness?
I only done one m20 harness so I know little hope this gets you started.
we did every combination of sensors. it was an automatic would this matter with the harness? i took care of neutral safety switch. i also have a m30 harness and a manual e30 harness in the garage. what would be most simple?
Ensure your engine harness is grounded properly (brown wires) and that you have power on the positive side of the coil while cranking. (solid green wire)
///Monstrosity. (OO≡≡[][]≡≡OO)
Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.
Comment