www.condorspeedshop.com
Solid Rear Subframe Bushings & 12mm Rear Subframe Riser Bushing Set
(click on photos for payment info)
Rear Subframe Bushings & 12mm Rear Subframe Riser Bushing Sets are here! These solid bushings raise the subframe a full 12mm to correct extreme negative camber on lowered cars. Average change is from -6 degrees to -1.5 degrees. We provide you with differential spacers and longer differential bolts to complete the installation. Pair either with a Differential Mount - UHMW (comparable to Delrin) -
The subframe and differential mounting point is the heart of the rear suspension in an E30. When they move, so do all of the rear suspension mounting points. Replacing the stock rubber subframe and differential bushings with UHMW will limit drivetrain and suspension movement and keep your car’s suspension geometry the way it’s supposed to be. They will last longer than the original rubber and do not 'wind up' under load/unload, transferring more power through the axles to the wheels.
• Condor 12mm Subframe Riser Bushing Kit - Reduces camber by 4.0 - 4.5 degrees (better for a street car).
• Condor Regular Subframe Bushing Kit - Does not change camber (better for a track car).
"You can compare to Solid Aluminum mounts in stiffness, but to Poly mounts in vibration"
The Condor E30 solid subframe and differential mount bushing kit is a direct replacement for the stock BMW subframe mounts and differential bushing. For BMW e30 (318 323 325 M3, not iX)
Comment