I have a bare S52 block that weighed in at 108lbs. I haven't take apart the N52 all the way yet but I'm certain it's less. :)
Announcement
Collapse
No announcement yet.
N52 Swap
Collapse
X
-
Its kind of funny working on the N52. The block, internals, and some components are all very light. Aluminum fasteners, plastic intake manifold, etc.. But then you mount this heavy electric water pump and alternator... It was hard to do. Guess they haven't found a cheap and light alternative to electrical windings yet!
Comment
-
So I finally got an exhaust system I am happy with. I was unable to get the engine quiet enough with any of the aftermarket stuff I tried. The Dynomax turbo that I used on the m54 was still too loud with the N52. That muffler is one of the quietest aftermarkets, so I looked into OEM stuff, and found that the X3 has a similar muffler configuration like the e30. (Most of the other models tuck the muffler perpendicular to the length of the car, which would not work on an e30. Anyway, from my understanding, the X3 muffler flows pretty well, and it also fits quite nicely. Sounds great without too much rumble. Very similar to my e46 M3 without the rasp. So, in short, I used SS headers, 135i middle section with cats and resonator, and then the X3 rear muffler.
While I don't have a finalized tune yet, the car is running very strong. It roars in the upper rpm range, and has a very similar feel to the e46 m3. Unlike the previous M54, this engine just keeps building power as you wind it up, and loves it. Hoping for a little more mid range which a finalized tune should deliver, but all in all, a great match-up!
- Likes 1
Comment
-
I watched "inside the motor" and am again blown away about how the N52 makes the M54 look archaic. https://www.youtube.com/watch?v=3gRhDKE8vKU
The motor will run without an intake manifold!
Comment
-
Originally posted by hoveringuy View PostI watched "inside the motor" and am again blown away about how the N52 makes the M54 look archaic. https://www.youtube.com/watch?v=3gRhDKE8vKU
The motor will run without an intake manifold!
Comment
-
Originally posted by Victell View PostWhats radically different about the N52 other than the variable valve lift?
-machined ports
-one piece head casting (stiffer, no separate front cover)
-super-simple and elegant VANOS. No more splines and cups. Huge range.
-hollow cam
-cam carrier
-variable lift
I'm probably missing a few things...
Comment
-
Originally posted by hoveringuy View PostJust in the cylinder head:
-machined ports
-one piece head casting (stiffer, no separate front cover)
-super-simple and elegant VANOS. No more splines and cups. Huge range.
-hollow cam
-cam carrier
-variable lift
I'm probably missing a few things...
Weight!!! Have you touched an n52 camshaft? They weigh ounces....the whole engine is like that. Super light, super responsive, and a DME that will make your head hurt.
Comment
Comment