Announcement

Collapse
No announcement yet.

e30 vert partout in northern va

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e30 vert partout in northern va

    my brother wrecked his vert, and is parting it out. nothing really left of the body exterior wise, but has a good strong drivetrain and some misc interior, suspension and electrical parts. let me know what you need or you can reach him at his cell thats on the cl ad.


    #2
    I tried calling and texting, but wasn't able to get through. Is the car still running? What's the ratio on the differential? Is it a limited slip? Any noise or leaks? Thanks.

    Comment


      #3
      What kind of shocks? I may be interested in the interior pieces also.
      My Multi car part out. Need a part? Pm me...
      http://www.r3vlimited.com/board/showthread.php?t=193051

      Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
      http://www.r3vlimited.com/board/showthread.php?t=215044

      Have you done business with me? If so leave me feedback here...
      http://www.r3vlimited.com/board/showthread.php?t=188307

      Comment


        #4
        open diff, 3.73. no noise or leaks if interested. i also have a 2.93 lsd in good shape, has e28 cover and flanges that would need to be swapped out of course. let mw know if interested in either

        shocks and springs called for already, sorry.

        Comment


          #5
          How's the shell? I may need a shell for rust repair, if this one has no rust in the right places....
          1974.5 Jensen Healey : 2003 330i/5

          Comment


            #6
            Originally posted by slammin.e28guy View Post
            How's the shell? I may need a shell for rust repair, if this one has no rust in the right places....
            heavy front end damage, the bumper shocks took most of the impact, but where they bolt to the frame collapsed a little. left rear taillight area also has some damage. the rest of the body is clean and straight, in primer. he got all the body work done, it was ready for paint. what panels do you need?

            Comment


              #7
              Mostly stuff in the rear. Front isn't bad on this one. Passenger rear wheel arch is bad along with the fuel door area, as is the areas around the tail lights. Rear, under the bumper too, and the "battery tray" in the rear. Passenger door jam needs attention too. I just want to have something to cut up. Scrap yard is under a mile from my house so short work would be made of it.
              1974.5 Jensen Healey : 2003 330i/5

              Comment


                #8
                Anyone able to swap engines? I have a blown HG on my 85 325e...and I really don't feel like forking over the cash for a shop to do it

                Comment


                  #9
                  how is the trunk lid? and what about the soft top?
                  My Multi car part out. Need a part? Pm me...
                  http://www.r3vlimited.com/board/showthread.php?t=193051

                  Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
                  http://www.r3vlimited.com/board/showthread.php?t=215044

                  Have you done business with me? If so leave me feedback here...
                  http://www.r3vlimited.com/board/showthread.php?t=188307

                  Comment


                    #10
                    Originally posted by ill4noreason View Post
                    how is the trunk lid? and what about the soft top?
                    trunk lid in good condition no dents or anything, sitting in primer. soft top no cracks or anything, rear window ok. does leak a little water fromt the front, i dont know if there is replaceable seal or anything.

                    Comment


                      #11
                      Ok I will try and call him tomorrow. Thanks man.
                      My Multi car part out. Need a part? Pm me...
                      http://www.r3vlimited.com/board/showthread.php?t=193051

                      Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
                      http://www.r3vlimited.com/board/showthread.php?t=215044

                      Have you done business with me? If so leave me feedback here...
                      http://www.r3vlimited.com/board/showthread.php?t=188307

                      Comment


                        #12
                        Originally posted by FrozenSolid View Post
                        open diff, 3.73. no noise or leaks if interested. i also have a 2.93 lsd in good shape, has e28 cover and flanges that would need to be swapped out of course. let mw know if interested in either

                        shocks and springs called for already, sorry.

                        I'll pass, but thanks anyway.

                        Comment


                          #13
                          Hit me up when the shell needs to be towed away.
                          1974.5 Jensen Healey : 2003 330i/5

                          Comment


                            #14
                            Originally posted by slammin.e28guy View Post
                            Hit me up when the shell needs to be towed away.
                            will do

                            Comment


                              #15
                              how much for a glove box latch (if he has one in decent shape) and possibly muffler hanger/mounts? i need the clamps that go around the muffler so i can hang it.

                              is the muffler a single inlet or the typical 6 cyl dual?

                              Comment

                              Working...
                              X