If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Was just curious if the same kinda thing could be done with the m3 hub as has been done with e36 stuff but without the offset change. By making a sleeve and a different nut.
Only reason I use an e46 hub in my conversion is due to cost, also the change in offset isn't that drastic. E36 disks still need a spacer on the conversion like if you used e30 m3 parts.
Comment