Announcement

Collapse
No announcement yet.

S54 swap, no power to fuse 11 (fuel pump)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    S54 swap, no power to fuse 11 (fuel pump)

    Hi, I was driving my car and I pulled over to the side of the road to check something. The car idled for about 15 seconds and then just died. I'm getting no fuel pump power. If I put a 12v jumper wire to fuse 11 the car will run.

    My fuel pump inline fuse is good and getting power.

    My EKP module is getting power at all the proper connectors

    Where else should I look?

    #2
    Hi,
    Try to install working EKP from another car to check.

    Comment


      #3
      I'll pull another one out of my e46 m3 and check

      Comment


        #4
        Hey how did you end up fixing this? I’ve got the same issue. I just finished my swap. Car fired up then after a few seconds died. Now it wont prime and no power to fuse 11 on crank. Have pretty much the same swap as you and same adapter harness into an early e30 325is. Thanks

        Comment

        Working...
        X